I am building an 801 and am installing Dynon auto-pilot servos. Has anybody already done this? Can you offer me any advice, diagrams, pictures, etc...? I have already purchased one with a control arm and another with a capstan. Any information would be greatly appreciated. Thank you.

Views: 509

Reply to This

Replies to This Discussion

Check with Mark Townsend, CANZAC. I believe he installed one in the first 750 he built.
There was a recent thread about installing autopilot servos in 601 airplanes, complete with pictures and good explanations. Since the Chris Heinz birds all have very similar control layouts (except in the wings, ailerons verses flaperons) you should look that thread over. Much of that info would be directly relevent to your installation, I should think.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service