Aeromomentum AM15, 750 Cruzer - Zenith Aircraft Builders and Flyers2024-03-29T08:10:32Zhttps://zenith.aero/forum/topics/aeromomentum-am15-750-cruzer?feed=yes&xn_auth=noTim,
Great info in your post…tag:zenith.aero,2023-01-26:2606393:Comment:8903062023-01-26T01:50:24.762Zcharlie rosenzweighttps://zenith.aero/profile/charlierosenzweig
<p>Tim,</p>
<p></p>
<p>Great info in your posts. How is it going, are things progressing well with the engine?</p>
<p>Tim,</p>
<p></p>
<p>Great info in your posts. How is it going, are things progressing well with the engine?</p> Thanks for the photos, very h…tag:zenith.aero,2020-12-14:2606393:Comment:7913782020-12-14T12:57:56.813ZTim Hinehttps://zenith.aero/profile/TimHine
<p>Thanks for the photos, very helpful. I sent the mis-matched spinner back to Aeromomentum October 20th. Lili sent postage label for the return of the bad spinner with the new spinner, per my request. </p>
<p>Thanks for the photos, very helpful. I sent the mis-matched spinner back to Aeromomentum October 20th. Lili sent postage label for the return of the bad spinner with the new spinner, per my request. </p> Looking good, how long ago di…tag:zenith.aero,2020-12-14:2606393:Comment:7910902020-12-14T08:59:20.188ZKevin Perreauhttps://zenith.aero/profile/KevinJamesPerreau
<p>Looking good, how long ago did you send it back? Ill have to follow them up, the freight from here in NZ to the states is horrendous.</p>
<p>Any way attached are photos of the cowl, I had to move the scoop at the bottom forward as the radiator was going to be too much of a tight fit.</p>
<p>The Cheeks were not so bad, just had to cut it and get it done, then faired it in with resin.</p>
<p>Looking good, how long ago did you send it back? Ill have to follow them up, the freight from here in NZ to the states is horrendous.</p>
<p>Any way attached are photos of the cowl, I had to move the scoop at the bottom forward as the radiator was going to be too much of a tight fit.</p>
<p>The Cheeks were not so bad, just had to cut it and get it done, then faired it in with resin.</p> Yes, I had to send my spinner…tag:zenith.aero,2020-12-12:2606393:Comment:7906472020-12-12T11:37:48.911ZTim Hinehttps://zenith.aero/profile/TimHine
<p>Yes, I had to send my spinner back to Mark, as the screw holes did not match the backing plate. Lili shipped me a new spinner of a different type, from a different vendor. I had to create the spinner to backing plate holes myself, first using clecos, then nutplates and screws. Very proud of how it turned out. Makes me think about using the same nutplate/screws to mount the cowl also, versus 1/4 turn camlocs.</p>
<p></p>
<p>I would love to see the pics of your cowl, as I started trimming the…</p>
<p>Yes, I had to send my spinner back to Mark, as the screw holes did not match the backing plate. Lili shipped me a new spinner of a different type, from a different vendor. I had to create the spinner to backing plate holes myself, first using clecos, then nutplates and screws. Very proud of how it turned out. Makes me think about using the same nutplate/screws to mount the cowl also, versus 1/4 turn camlocs.</p>
<p></p>
<p>I would love to see the pics of your cowl, as I started trimming the bottom cowl yesterday. The location of the cheeks is the main thing that is unknown. Even with the CAD drawings , its still not all that clear.</p> Hi Tim I have mounted mine it…tag:zenith.aero,2020-12-10:2606393:Comment:7896352020-12-10T22:36:41.777ZKevin Perreauhttps://zenith.aero/profile/KevinJamesPerreau
<p>Hi Tim I have mounted mine its not that bad I can send you some photos.</p>
<p>As an aside I received my engine and cowl around the same time BUT have found my spinner and mounting plate do not match one says 5 and the other 4 so Mark has emailed some builders that were sent spinners at the same time to see who else has a miss match. Would you mind checking yours for me? </p>
<p>Hi Tim I have mounted mine its not that bad I can send you some photos.</p>
<p>As an aside I received my engine and cowl around the same time BUT have found my spinner and mounting plate do not match one says 5 and the other 4 so Mark has emailed some builders that were sent spinners at the same time to see who else has a miss match. Would you mind checking yours for me? </p> Yes, received cowl December o…tag:zenith.aero,2020-09-28:2606393:Comment:7399212020-09-28T09:55:52.807ZTim Hinehttps://zenith.aero/profile/TimHine
<p>Yes, received cowl December of 2019, actually waited about 9 months to get engine AND cowling shipped together. It was frustrating, I must say. I do wish the cheeks had been preinstalled, not really looking forward to mounting the cowl and cheeks, sounds like it will be an adventure. </p>
<p>Yes, received cowl December of 2019, actually waited about 9 months to get engine AND cowling shipped together. It was frustrating, I must say. I do wish the cheeks had been preinstalled, not really looking forward to mounting the cowl and cheeks, sounds like it will be an adventure. </p> Looks great! Have you receiv…tag:zenith.aero,2020-09-25:2606393:Comment:7380452020-09-25T16:25:20.045ZBrady Butterfieldhttps://zenith.aero/profile/BradyButterfield
<p>Looks great! Have you received your cowl yet?</p>
<p></p>
<p>Looks great! Have you received your cowl yet?</p>
<p></p> No, wings aren't mounted yet,…tag:zenith.aero,2020-08-03:2606393:Comment:7309152020-08-03T18:09:55.503ZTim Hinehttps://zenith.aero/profile/TimHine
<p>No, wings aren't mounted yet, so we haven't gotten to a final weight yet. I will post it when we do.</p>
<p>No, wings aren't mounted yet, so we haven't gotten to a final weight yet. I will post it when we do.</p> Tim looking good. Just wonder…tag:zenith.aero,2020-08-03:2606393:Comment:7307862020-08-03T02:13:07.451ZChris Aertshttps://zenith.aero/profile/ChrisAerts
<p>Tim looking good. Just wondering if you ever got around to weights of the aircraft yet. Im getting closer to starting to build. Your building just what I want. </p>
<p></p>
<p>Tim looking good. Just wondering if you ever got around to weights of the aircraft yet. Im getting closer to starting to build. Your building just what I want. </p>
<p></p> Even more cooling system picstag:zenith.aero,2020-04-18:2606393:Comment:7178572020-04-18T00:55:23.240ZTim Hinehttps://zenith.aero/profile/TimHine
<p>Even more cooling system pics</p>
<p>Even more cooling system pics</p>