Has anyone had issues with twist?  No matter how I cleco I get a twist.  Picture is my outboard slat.

The trailing edge looks actually pretty good, the leading edge is the culprit.

All 4 of the slats has had this issue with the leading edge bottom ribskin attachment being off..

Thanks for any help

Views: 233

Attachments:

Reply to This

Replies to This Discussion

From the looks of your video, I would say "good job!" (Assuming it holds after riveting.) I strapped my slats to the flat table for drilling and riveting and the result was about what you have. There is some leeway for error.

Thank you Ken..

I would go with "no worries" - when you fit it to the wing you'll be able to adjust if necessary.  Most likely you will not be able to measure the difference once mounted.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2021   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service