Online Community of Zenith Builders and Flyers
Has anyone had issues with twist? No matter how I cleco I get a twist. Picture is my outboard slat.
The trailing edge looks actually pretty good, the leading edge is the culprit.
All 4 of the slats has had this issue with the leading edge bottom ribskin attachment being off..
Thanks for any help
From the looks of your video, I would say "good job!" (Assuming it holds after riveting.) I strapped my slats to the flat table for drilling and riveting and the result was about what you have. There is some leeway for error.
Thank you Ken..
I would go with "no worries" - when you fit it to the wing you'll be able to adjust if necessary. Most likely you will not be able to measure the difference once mounted.