I started out trying to figure how to add a little weight to the tail.  Wound up putting a toolbox under the ht.  That design lead me to fair in the front corners of the ht mounts as well.

Was a days work or so , but fiberglass would  have taken a while too and now i have a hidden toolbox.  It all removes easilu with a few screws for inspections. 

Views: 211


Reply to This

Replies to This Discussion

I cleaned up the HT/Fuselage area in a similar fashion on my 750 three years ago.  Made the fairings out of .020.

Looks like the photos didn't go thru - I'll try again

That's very nice, thank you for sharing! I am going to do the same thing.


New from Zenith:

Zenith Planes For Sale 

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits

Zenith Apparel from EAA:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:


West Coast USA:

Pro Builder Assistance:


Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2021   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service