Can you please guys help me? I have made the upper 7F41 and I am about to make the 2A and 2B. I have a couple of questions. Do I need to clamp at the hinge before bending and drilling?. Also 7F43 matches the hole pattern of 2A-2B? Thank you.

Views: 167

Reply to This

Replies to This Discussion

Please let me know if I am not clear

What I did was cut both the blanks for 2 a and b and  drilled the hole for the rudder pivot in both and bent them. With the top hinge plate mounted to the fusilage I then used a rod thru the pivot holes thru all three hinge plates for alignment then was able to drill for one of the lower hinge plates and then match drilled the second plate. Hope that helps. Dan.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service