After building the elevator skeleton and adding the rear skins. I checked that all appeared straight and square. I added the nose skins, checked their position and taped them in place. Starting in the center and working towards the outside, I drilled the nose skins along the spar, top and bottom. To my horror, the nose skin had " walked" away from the end tip ribs leaving a 3/16 th inch gap. WTH!?! They were tight when I started! Looks like I'll be ordering new elevator nose skins tomorrow. :/

Views: 382

Reply to This

Replies to This Discussion

Dont feel bad.  Im on track to make two planes with all the mistakes I have made.

Thanks.  Yep, not the last mistake I'm sure.

WOW...almost happened to me but I was lucky...I caught mine in time and taped the bejeebers out of both sides after that scare ...the couple of pieces of duct tape shown on the HBH videos don't cut it IMHO.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service