Don Morrisey's Discussions (835)

View

Discussions Replied To (210)	Replies	Latest Activity
"Hi Ken...raising the compression to 9.5:1...I believe stock compression is 8.5:1...i…" Don Morrisey replied Jun 6, 2018 to So what does an O200 cost?	18	Mar 2, 2020 Reply by Carl Orton
"Gil I don't know if it is possible to reach those nuts with a spray but I have heard…" Don Morrisey replied Jun 4, 2018 to uAvionix skyBeacon ADSB-OUT Installation and Review	16	Oct 26, 2021 Reply by John Austin
"So, this type of wire can be straightened out? " Don Morrisey replied May 27, 2018 to Cowl Hinge Pin - where to buy?	9	May 28, 2018 Reply by Patrick Hoyt
"I gooped up the two wheel halves and the O ring with plumbers grease from Home Depot…" Don Morrisey replied May 27, 2018 to Tires	7	May 27, 2018 Reply by Don Morrisey
"Ken, great info, I assume the dual power feed is so you could wire several circuits…" Don Morrisey replied May 17, 2018 to Fuse holder panel holes	15	May 18, 2018 Reply by Jim and Amelia Isaacs
"Jim if you look on mouser or digikey you should be able to find those fuse holders t…" Don Morrisey replied May 17, 2018 to Fuse holder panel holes	15	May 18, 2018 Reply by Jim and Amelia Isaacs
"Ken, is the fuse panel used in your pic the same one John highlighted from ACS? Ver…" Don Morrisey replied May 17, 2018 to Fuse holder panel holes	15	May 18, 2018 Reply by Jim and Amelia Isaacs
"Gil unless you actually see a leak you're probably burning that much. I had a Lyc 3…" Don Morrisey replied May 12, 2018 to NEW ENGINE FORUMS!	17	Jun 9, 2018 Reply by John Austin
"Perfect!!! Sounds like a great stopover. " Don Morrisey replied Apr 25, 2018 to EAA Tie-Down Mod	13	Apr 27, 2018 Reply by Keith Doot
"John, did you camp at the airport on Cedar Key? I discovered this little gem of an…" Don Morrisey replied Apr 25, 2018 to EAA Tie-Down Mod	13	Apr 27, 2018 Reply by Keith Doot

‹ Previous
1
…
12
13
14
15
16
…
21
Next ›

RSS

Welcome to
Zenith Aircraft Builders and Flyers

Sign Up
or Sign In

Or sign in with:

New from Zenith:

Zenith Planes For Sale

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

West Coast USA:

Pro Builder Assistance:

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Zenith Aircraft Builders and Flyers

Don Morrisey's Discussions (835)

"Hi Ken...raising the compression to 9.5:1...I believe stock compression is 8.5:1...i…"

"Gil I don't know if it is possible to reach those nuts with a spray but I have heard…"

"So, this type of wire can be straightened out? "

"I gooped up the two wheel halves and the O ring with plumbers grease from Home Depot…"

"Ken, great info, I assume the dual power feed is so you could wire several circuits…"

"Jim if you look on mouser or digikey you should be able to find those fuse holders t…"

"Ken, is the fuse panel used in your pic the same one John highlighted from ACS? Ver…"

"Gil unless you actually see a leak you're probably burning that much. I had a Lyc 3…"

"Perfect!!! Sounds like a great stopover. "

"John, did you camp at the airport on Cedar Key? I discovered this little gem of an…"

New from Zenith:

Builder & Pilot Supplies: