Jim Reese's Discussions (63)

View

Discussions Replied To (12)	Replies	Latest Activity
"I put the washers at all rod ends on my build. Example in photo. Some washers had to…" Jim Reese replied Apr 4, 2023 to Large washers next to rod end bearings?	12	Apr 20, 2023 Reply by David J. Beaulieu
"I have had similar issues on mine. Are you sure there is no air trapped in fuel line…" Jim Reese replied Mar 1, 2023 to 130 won’t start	3	Mar 1, 2023 Reply by Jan Eggenfellner
"photo of how I did mine. Two lithium motorcycle batteries. Fine so far with 50 hours…" Jim Reese replied Feb 4, 2023 to Battery Location	6	Feb 5, 2023 Reply by Ronald LeBlanc
"Here is a couple photos how I did it. Used 4-40 stainless screws. " Jim Reese replied Nov 22, 2022 to zenith ch750 top window	15	Nov 22, 2022 Reply by Jim and Amelia Isaacs
"Can't say too much about cruise speed. I've never tried full throttle, either take o…" Jim Reese replied Oct 19, 2021 to Luga (NR) Simitar Propeller	6	Oct 19, 2021 Reply by Glen Bradley
"I have an Aeroprop propeller. Looks exactly the same, I suspect they come from the s…" Jim Reese replied Oct 19, 2021 to Luga (NR) Simitar Propeller	6	Oct 19, 2021 Reply by Glen Bradley
"I added a vent at a later date. I used a Bundy connector (quick fuel connect). It wa…" Jim Reese replied Aug 23, 2021 to Braided fuel lines.	5	Aug 23, 2021 Reply by Jim Reese
"I don't have a decent photo of my area where lines enter the cabin, but I will inclu…" Jim Reese replied Aug 23, 2021 to Braided fuel lines.	5	Aug 23, 2021 Reply by Jim Reese
"I can make a comment about how not to do it. Photo of how I ran the lines from cabin…" Jim Reese replied Aug 23, 2021 to Braided fuel lines.	5	Aug 23, 2021 Reply by Jim Reese
"Yes, I used smaller music wire for pins and prebent them a bit to match the curve. I…" Jim Reese replied Aug 12, 2020 to Cowl mounting advice	7	Aug 14, 2020 Reply by Patrick Hoyt

‹ Previous
1
2
Next ›

RSS

Welcome to
Zenith Aircraft Builders and Flyers

Sign Up
or Sign In

Or sign in with:

New from Zenith:

Zenith Planes For Sale

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

West Coast USA:

Pro Builder Assistance:

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Zenith Aircraft Builders and Flyers

Jim Reese's Discussions (63)

"I put the washers at all rod ends on my build. Example in photo. Some washers had to…"

"I have had similar issues on mine. Are you sure there is no air trapped in fuel line…"

"photo of how I did mine. Two lithium motorcycle batteries. Fine so far with 50 hours…"

"Here is a couple photos how I did it. Used 4-40 stainless screws. "

"Can't say too much about cruise speed. I've never tried full throttle, either take o…"

"I have an Aeroprop propeller. Looks exactly the same, I suspect they come from the s…"

"I added a vent at a later date. I used a Bundy connector (quick fuel connect). It wa…"

"I don't have a decent photo of my area where lines enter the cabin, but I will inclu…"

"I can make a comment about how not to do it. Photo of how I ran the lines from cabin…"

"Yes, I used smaller music wire for pins and prebent them a bit to match the curve. I…"

New from Zenith:

Builder & Pilot Supplies: