Online Community of Zenith Builders and Flyers
Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
750 to corvair engine mounthas anyone got the plans or specs for the engine mount on the 750 to corvair engine. My engine is complete waiting on kit to arive Started by terry pell |
2 |
Sep 30, 2011 Reply by Bob Pustell |
How to terminate 26 ga wire?I've installed the R Allen stick grips on my dual sticks and put one with 5 buttons on the pilot side (PTT, Trim up, Trim down, and two aux… Started by John Austin |
4 |
Sep 27, 2011 Reply by Chris Aysen |
Strength of 750 nose gearHow strong is the nose gear on the 750? Is anyone landing, taxiing, in deep soft sand? How about rocks? How big? A friend tells me his b… Started by Mike Ice |
7 |
Sep 25, 2011 Reply by Don Burkholder |
1.3 L Suzuki EngineIf anyone has used a 1.3 L Suzuki engine in a CH 701, I would like to know how well the installation went. Did you have to build a custon c… Started by Stanley Todd |
2 |
Sep 23, 2011 Reply by Stanley Todd |
CH-750 Door SupportsIs there any info available to help an all-thumbs type (me) install the supports used to hold the CH-750 doors open? Like, measurements, ph… Started by Peter Bennett |
11 |
Sep 22, 2011 Reply by Peter Bennett |
Instrument panel paint or treatmentWhat paint or treatment did you use on your instrument panel? I'm leaning toward dark gray or black with a flat or wrinkle finish to conce… Started by Larry Winger |
9 |
Sep 21, 2011 Reply by Phill Barnes |
Baggage BackGroup, I am trying to get the Baggage Back 75F5-2 asssembled and am having problems with drawings and part numbers, I think? I have editi… Started by Dr. Edward L. Olds III |
8 |
Sep 20, 2011 Reply by Luiz Guerreiro |
Using the Aerocarb carburetor with a conventional throttle control.I noted the posting elsewhere in this forum offering an Aerocarb carburetor, and the device appealed to me. However, it requires a reversin… Started by Jim B Belcher |
2 |
Sep 19, 2011 Reply by Jim B Belcher |
Seat ConstructionI'm considering having my seats built-up locally from the seat pan and back that Zenith supplies in the 750 kit. Hi-Tech Foams quoted me $2… Started by John Austin |
12 |
Sep 18, 2011 Reply by Jim B Belcher |
Headliner IinstallationI originally planned to just Scotchbrite and clearcoat the ceiling in the baggage area on my 750 build. I'm now thinking I would rather in… Started by John Austin |
1 |
Sep 15, 2011 Reply by Don Herbel |
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).