Jabiru Engine Forum (98)

Discussions Replies Latest Activity

Gull wing baffles on Jabiru vs Camit

I just noticed something the other day about my friends Camit 3300 engine. His metal Gull wings(that's what Jabiru calls them) are located…

Started by Randy Ferri

2 Sep 19
Reply by John Burns

Problem with left mag, Jabiru 3300 engine

I am having problems with the left magneto on my Jabiru 3300 engine. When I conduct the mag checks there is almost no rpm drop on the righ…

Started by Eugene Stone-Romero

7 Sep 12
Reply by Dan Dempsey

Charging System

I am suddenly having trouble with the Jabiru Charging system keeping up with the vary low electrical load in my CH750 STOL.  Last week we f…

Started by John Burns

6 Sep 12
Reply by John Austin


    After spending many years building and tuning air cooled, low rpm, high torque Harley Davidson engines, I am now into experimental air…

Started by Eric Genzlinger

5 Aug 8
Reply by Eric Genzlinger

interference: throttle cable and idle screw

Hello, I posted this on the jabcamit forum, but thought I'd post here too, just in case... I'm installing a 4th gen 3300 on a CH601-HD.…

Started by Carlos Sa

6 Aug 6
Reply by Carlos Sa

Oil pressure reading with engine shut down

Probably a dumb question but this is the first time I’ve noticed that my oil pressure on the Dynon 120 shows 33 lbs with the engine off and…

Started by Joe Donohue

6 Jun 1
Reply by John Austin

3300 low power ?

HiHo, I suspect that my Jabiru 3300 motor is underpowered because it does not get up to the required RPM when stationary on the ground. I…

Started by Steffen Glatz

39 May 23
Reply by Dan Dempsey

aerocarb for Jabiru CH750

Anyone put an aerocarb on a CH750?  Were you able to install the throttle on the panel?  Dual throttles?  Mixture knob or use the aerocarb…

Started by jerry nichols

3 May 22
Reply by jerry nichols

Rotor button adhesive

The Jabiru engine maintenance manual calls for “a small batch of 5- minute epoxy adhesive combined with a small amount of fiber (such as co…

Started by Joe Donohue

3 May 18
Reply by Bob Simmons

alternator to regulator wiring

I am just wiring up my Jabiru gen 4 to the regulator and have a question about which wire goes to #1 on the regulator and which wire goes t…

Started by Richard Benson

6 May 9
Reply by Richard Benson


New from Zenith:

Zenith Planes For Sale 

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits

Zenith Apparel from EAA:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:


West Coast USA:

Pro Builder Assistance:


Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2022   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service