Can you get insurance for a partially build kit?

if so do you have any recommendations of who to talk to?

Thx
Gary

Views: 391

Reply to This

Replies to This Discussion

Yep, I use C-PLAN from EAA (Canadian version)  Insuring my partial kit to completion for 60k cost me about $600.00 a year.  I'm building in my garage which is attached to my house and an "airplane" is specifically not covered if something, god forbids, happens in there.  No "N" or "C" number required in my case, but they do want a serial number.  Not peanuts, but I sleep better! :D

My project (STOL 750) is insured ($47,000) through Falcon for $580 per year. My hangar landlord required it.
Falcon will accept a reserved N number. Just go to FAA registration site and reserve a registration number ( N number) and then contact Falcon.
Avemco offered me partial kit insurance when I called them to get the required hangar liability insurance. I declined so have no idea what the cost was.

I only have a reserved N-number, too.

Hi Gary,

I was given a builders quote for my project (CH650) by AVEMCO for $280.  This would cover the aircraft only with no liability up to $20k with a $200 deductible.  I'm not sure but I think the guy said it would also cover lost construction time at $15/hour of logged time (perhaps I just dreamed that). 

Falcon through the EAA quoted $250, but didn't really give me any additional information except that they cover up to $40k and that it required an 'N' number (which I already have reserved anyway.

I suppose it might be important to try and figure out which would be easier to roll into flight insurance upon completion.  But I am a long way off from that.

Good luck.

Dave W

It's been my experience that a specialized, aviation insurance broker is the way to go. They can get you all the discounts the "alphabets" (AOPA, EAA, etc.) offer and usually at an even better price, anyway. Most professional aviation brokers actually talk to the underwriter that ultimately determines what you'll pay, so they can "sell" you to the underwriter and get the best price with the least number of restrictions/prerequisites  such as number of hours of dual required prior to solo or whether dual is required at all!  Virtually all the companies that insure experimentals will insure them under construction and usually all it then takes is a call to the broker to increase coverage for first flight since you're "pre-approved."

I've always used a broker - doesn't cost anything, better prices, and you don't have to do the "legwork!"

John

N750A

I went with Avemco for now. Cost me just over $200 , non flying. I will shop around when it comes to my flying aircraft insurance.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service