For those of you "up north" and in need of a quick project I cobbled together a Self Contained  "Solar Heater" for my plane.  To date I have been impressed and have not had to do any pre-heating with the "ole red dragon".

We had some cold (teens) wx a few weeks ago and the thing worked very well OAT 18F, Heater 180F - 205F, (that's right) and cowl temp 100F that's with no fan. I don't see the 100F at the oil temp gauge because of air flows but the oil is consistently in the high 40's for start AND that would include the whole engine.

With a fan you get slightly lower temps in the heater, 160F or so, but higher under cowl temps  because you pull off the hot air with the flow - but you get a more uniform heat. Anyway I go out on a sunny day or even not so sunny day and it's heated and ready to go.

The over-all idea is to hang the heater on a south facing outside wall to capture the free heat from Ole Sol.

Added several things to the normal box and go ideas:

  • Used vented soffit for my collector and followed these ideas except I used wood for the box .

            www.builditsolar.com/Projects/SpaceHeating/KenSoffitCollector/Main.htm

           My heater wasn't as big so only used 4" duct and that seems to be a good fit. I probably have seventy five bucks in the project.

  • Added a "fan" (old computer 12v) for positive flow. actually works well because it isn't big enough to draw down the heat but has air flow. Not necessary but more effective. Wanted it self contained so I purchased a solar panel to provide 12V at 5 watts.
  • Used insulated ducting from a HVAC shop in my town. Actually gave me old stuff to use.
  • Designed as a closed flow circuit to save heat.
  • Insulated cowl with stuff from my local Lowe's Aircraft Supply.

Several pics attached in no order

Have fun and let my know how it works for you.  madriver@gmail.com

Still grinning

Phil Smith

CH 701

Buhl, ID

Views: 593

Attachments:

Reply to This

Replies to This Discussion

Phil..I love the ingenuity, great project and result.

The over-all idea is to hang the heater on a south facing outside wall to capture the free heat from Ole Sol.

To minimize earth moving, my turf airstrip runway wound up oriented 06/24. When I eventually constructed a 40' x 60' hangar, I naturally put the front doors (Horton Stack Doors 10' x 55') parallel to the runway, so the hangar doors are facing SSE or 150 degrees. The Horton doors use grey translucent fiberglass panels. I also poured a 30' x 60' concrete ramp out front.

I'm in a moderate climate in East Tennesse, and this configuration (by sheer luck on my part!) acts as a passive solar collector. As long as the sun shines, it's delightfully warm in the winter in the hangar (it has an insulated roof but only a small portion of the walls are insulated). I still preheat, but the little heater doesn't have to work very hard!

John

N750A

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service