Today I washed my STOL 750 in anticipation of flying to the Zenith Homecoming in Mexico, MO. My typical routine is to wash the belly first, then the wings, tail, and then the fuselage.  Typically I would then use a chamois or towel to wipe down any remaining water to try to avoid water spots.

Today, I suddenly had an inspiration - my hangar-mate and I had recently purchased an EGO 56V leaf blower for occasionally blowing off the hangar floor and ramp. I had heard of people blowing their cars dry, so I gave it a try on the plane and it worked great!  There were just a few spots of fine droplets left that I dried with a towel, but the vast majority of the surfaces were perfectly dry and no spots! 

I've not seen this mentioned before, so I thought I'd mention it - it's a real work and time-saver.  Of course, one must be cautious and use some judgement when directing the air stream at control surfaces and avoid blowing into the trailing end of a fairing that is open such as the one on the dorsal tail fin, but on my STOL 750, the leaf blower's air stream was not sufficient to lift or buffet the elevator, rudder or flaperons - probably a balanced control surface would be more susceptible to movement.

John

N750A

Hope to see you at the Homecoming!  :>)

Views: 303

Reply to This

Replies to This Discussion

Hope you have a good time and stay safe, we will not be attending this year , We would have to self quarantine for 2 weeks upon return ,may be next year,  That would give more time to finish the cruzer project to fly it down to zenith

harm and Trish

see ya Friday

My favorite way to dry a plane is to go flying. When there are localized rain showers in my area I have even been known to go up and fly in and out of the rain columns if the plane is getting grimy. It is fun to watch the dirt line work its way back along the wing surface as the rain moves aft.

I freely admit my method does not result in a perfectly clean plane but it does surprisingly well, better than one would expect. And, it is way more fun that washing and drying on a washstand.

This turned out to be a timely topic!  I flew to the Homecoming and there at KMYJ one of the members was washing his 701 by sitting it on its tail.  This tilts the wings so you can easily scrub them with a brush on a pole and also exposes the underside of the wings better for washing.  Of course they obviously drain better, too. Why didn't I think of that? 

I don't know if the 750 STOL will sit on its tail, but I have a lead weight I sometimes strap to the tail tie-down ring to lift the nose off to work on the front wheel, etc, so that'll work just fine to pull the tail down and aid with washing!

John

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service