I have the ULPower 350iS  I have the ACS 510 ignition switch however it is for magneto'd engine. Does anyone make an Off, Lt, Rt, Run, Start  ignition switch for a coil?

Views: 653

Reply to This

Replies to This Discussion

Greg, are you trying to have just one switch to cover the three functions (coil #1, Coil #2, and the ECU) rather than three separate switches?  The guys at the Aero-Electric connection forum would certainly be able to offer some insight and help if you post the question and explain your design objective.  HTH  Cheers!

Dave

Greg, I advise to install toggle switches instead of the ACS 510 

Herman, can you give some details on how to do this?  What do you use as a Starter switch?

Ray at UL and Roger at Zenith both say a conventional Off, Lt, Rt, On and start switch work fine and is what was supplied with my FWF package. I have it installed am almost ready for a first start. For first start, one of the coils should be disconnected to ensure one circuit is functional, then the same with the other.

SHOW ME THE CONNECTION DIAGRAM FOR THE ACS A-510-2 IGNITION KEY
I HAVE A UL 350 is
THANK YOU!!!!!

Scott, I totally missed your reply on this, I did not see the notification

I do not install the ACS switch, I like toggle switches better. It is possible but you need to use relays. this can be found in the ULPower install manual on page 44

I use a push button starter via a relay to activate the starter motor.

As long as you use 16awg for the starter circuit on the ACS keyed switch, no relays are required. Checked this with Ray and Roger. The Zenith UL350 prototype uses an ACS keyed switch. I don’t know about other brand keyed switches.

Correction. 14awg wire for the starter circuit as per the UL manual. Note that the L and R magneto selections function through the ECU to shut down either coil so no heavy or shielded wire is required here. 

Thanks Herman...

CAN ANYONE SHOW ME THE CONNECTION DIAGRAM FOR THE ACS A-510-2 IGNITION KEY?
I HAVE A UL 350
THANK YOU!!!!!

This ok?

Attachments:

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service