Hello everyone, hope all is well!
Can someone give me some info on folding wings on a 701?

How does the procedure go? How long it takes to fold or place back? Ease or difficulty in putting plane on trailer ? Drawbacks?

Views: 680

Reply to This

Replies to This Discussion

Do you just want personal experiences/opinions? The Zenith info is as such:

http://www.zenithair.com/stolch701/fwo.html

Here's a two-man operation on the 750 STOL.

And Steve doing it alone on teh 750 STOL:

And there are some discussion threads here on the Forums as well.

Thank you!

This is very helpful.

I’ll search on the forum for fellow members’ experience with the folding wings or perhaps someone who has folding wings on his/her plane will post a comment.

Have a great day,

Nelson 

I have zero experience with the folding wing option, but the most common comment I remember seeing on these forums is that since you have to drain the fuel tanks, it is a real hassle - so much so that it might be justifiable for someone in an area with extreme winters and wants to fold the wings once a year and store the plane at home for the winter, but not convenient enough to keep the plane at home/off-airport , transport it to the airport, and fold/unfold wings for each and every flight.

John

N750A

Yeah Jon definitely. I believe Zenith even goes as far as to say the FWO is not recommended for daily use.

Hi all,

Having had a small trailerable sailboat, with a roll up keel and and easy to raise mast, meant for sailing and trailering home afterward. Rigging it was still onerous to the point where one wanted to find a place to leave it with the the mast up (in or out of the water). The current folding wing design for the 701 appears as it might lead one to the same conclusion, e.g. hangering or tying down. There are videos out there of planes which are flown regularly  and stored wings folded. I have to believe there must be an efficient methodology yet to be found to do this with a 701. I hope to explore the idea once I get my plane flying. That said, it would be good to see some brainstorming of ideas on the subject. One idea I thought of to get the fuel out would be to have the tanks plumbed to a small light 12 v pump that could evacuate the fuel tanks into Jerry Cans or purpose made tank in preparation for folding the wings. Also the use of aviation safe pins rather than bolts for the connections (No aeronautical expertise to know what these would look like). Would like to hear any ideas out there. 

Thank you John, Efe and Perry!

All my concerns have been answered by your posts and have helped me decide that folding wings are not for me.

My initial thoughts about folding wings were sparked by dreams of putting the plane on a trailer and hangaring it in my metal building off our airstrip thus not needing a hangar (hard to come by at our airstrip).

It’s obviously too much of a hassle, particularly having to drain the fuel tanks for someone who likes to fly often.

That said, best option at this time seems it’ll have to be tying down and waiting for a hangar to become available.

Thanks to all, happy flying and stay safe,

Nelson 

I also liked the idea, especially since my interest in Zenith and kit aircraft started when I happened to drive by a dirt field close to our (now sold) summer house and thought of the possibilities. It was a good 3-3.5 hour drive there on weekends once I was able to leave the inner city, and just doing that usually took a few hours on Fridays. So I imagined getting off work, driving the five minutes to the airport and getting in my kit aircraft to fly to the summer house. Call the wife 15 minutes before my ETA, so she can drive over with the trailer and pick me up.

By the way, here's some more details on potential fuel line installation thoughts regarding the FWO.

http://www.zenith.aero/forum/topics/wing-fuel-lines-folding-wing-op...

Very interesting info. Thanks!

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service