Wayne Woloshin's Comments

Comment Wall (117 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 9:22am on March 3, 2020, Mark Debruin said…
Very good thanks Wayne.
At 8:49am on March 3, 2020, Mark Debruin said…
Wayne, where can I find zinc-chomate or cortec?
At 5:36pm on March 2, 2020, Mark Debruin said…
I was at the factory last Friday picking up my tail kit. Our family cottage is in honey harbor in sure we can arrange something once the weather warms up.
At 3:33pm on March 2, 2020, Mark Debruin said…
Hello Wayne, would love to meet up. I am located in Beamsville Ontario.
At 4:58pm on February 26, 2020, kevin huff said…

well I do not have the option of leaving the wife home so I will continue the search for an 750 or 801 finished or partial even some thing that might have had a repairable damage 

At 11:22pm on February 25, 2020, kevin huff said…

thanks for the answer now all I have to do is find a plane and figure out how this site works without making someone mad haha

At 9:23pm on December 13, 2019, Todd Luebstorf said…
Thanks Wayne, yes it would be great to meet someday. Your daughter lives pretty close to me.
At 5:15pm on November 22, 2019, Robert Shoukry said…

I don't think the Sebring show will be held anymore

At 5:09pm on November 22, 2019, Robert Shoukry said…

I posted an ad here and cannot for the life of me find out how to delete it and post a new one. I have a 912uls complete engine for sale and was hoping to list it here

At 5:07pm on November 22, 2019, Robert Shoukry said…

So you're going to be here around January 2020 right

At 5:00pm on November 22, 2019, Robert Shoukry said…

Hello Wayne

Sorry it took me a little while to get back to you. Absolutely. Drop me a line when you are in Florida. I am presently working ot two kitfoxes a 3 and a 5. I have been in search for a zenith 750 but the prices have gone up and I figure I will wait and find a project that someone has not finished ... 

Reach out to me when you get in

Thank You

Robert

At 3:11pm on November 22, 2019, Hugh Urquhart said…

Thanks Wayne, I will.

At 5:28pm on November 7, 2019, Robert Shoukry said…

Sure thing Wayne, looking forward to it

At 3:09pm on October 19, 2019, Auroramech (DanB) said…
Wayne it's the Auroramech
I tried to answer to your comment on my wall but I'm new to the forum and am not sure if it worked. Did you receive it?
Thanks
Dan
At 7:27pm on October 7, 2019, Jonathon Peacock said…

Thanks Wayne, beauty hangar!

At 4:58pm on September 15, 2019, Stephen Wicklander said…

Thanks Wayne,

I hope so also.

Steve Wicklander

At 7:45am on July 25, 2019, Tony Harnett said…

Hi Wayne,

Enjoyed the Midland Fly-In very much ... it was good meeting you as well. Don't know if Edenvale is in the cards at this time but hope to see you there.

Cheers, Tony

At 8:50am on June 16, 2019, Thomas Knight said…

Thanks Wayne,

We met at the Thursday lunch 4-5 weeks ago.. I was the guy asking all the questions about your 701. I’d love to come have a look at yours sometime.

cheers

tom

At 5:35pm on May 12, 2019, Ron Crook said…

Hello Wayne did you get a  chance to test fly the plane for the new season? Flew Teds 701 from owensound to edenvale yesterday..nice flying airplane. Flew mine last weekend and finally the radio seems to be working properly. we have to get together at some point Im ready for my climb test and file to get away from the airport tired of flying circles around for 25 miles...maybe you can fly up to owensound just call me first to see if Im up? Ron and Val

At 2:50pm on December 23, 2018, David J. Beaulieu said…

Wayne,  who knows why a cylinder develops a crack?  Unless you send it away for analysis to see if it was a material or manufacturing defect I would be guessing.  If I am going to guess I would say it may be "under" designed.  ULPower has increased the thickness of the flange and cylinder base since my early version of the engine.  As it stands now, I have replaced only that one cylinder with the newer version and will keep any eye on the others.

Congratulation on your new hangar...I'm envious!! Cheers and Merry Christmas...Dave

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service