I installed my comm antenna on my Cruzer. Top mount, Comant-121. I mounted it directly behind the rivet line for the upper baggage compartment wall where it joins the upper fuselage skin.

I used a piece of .060 backer plate that extended behind the antenna by about an inch. To that, I cut and riveted a piece of L angle that extends to the diagonal stiffener for that bay.

I have not yet riveted the upper skin aft of the upper forward corner braces to allow access for running cables, etc.  When I cleco it all into position using every other rivet hole, I don't have audible oil canning, but I do still have some foreward / aft flex. Probably less than 1/4".

Am I over analyzing this and they all flex, or should this be rock-solid, no movement whatsoever?  Just concerned about ultimately stress cracking.

Thanks for any thoughts on this matter;

Views: 272

Reply to This

Replies to This Discussion

I mounted my comm antenna similar to the way you describe on my stol 750 and only have 90 hours on it, but it works fine.

Thanks, Robert, for the reply. I’m not too concerned about it functioning as far as RF, I’m mostly concerned if the fore/aft flex of the antenna base is an issue of concern. 

Hi Carl,  I didn’t really say what I meant - the skin shows no sign of stress, but maybe it will with more hours on the plane.  I don’t think it’s a problem though.  Also, sometimes it seems like riveting stiffens things up over just cleco’s  which might make a little difference?

Good point on full rivet stiffness. It definitely stiffened up when I cleco’d all holes between stiffeners. 

If you are really wondering if it will be o.k., check out this video from EAA. Once you know how much force is being placed on the antenna in flight, you can ground check it with the same force and check for frame deflection.

https://video.eaa.org/detail/video/3946101313001/calculating-antenn...

Great resource!  I will definitely do that cake and test on my install!

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service