Hi, All;

I'm at that point (aft fuselage) where I'm going to start installing some of the steel weldments like the flaperon control tube, flaperon pushrods, etc.  I found a local shop that had some pretty good reviews, so I'm taking the parts to him Monday for an estimate.

Separating the steel parts from the rest of the remaining kit parts was somewhat enlightening, so I got to wondering if standard practice was to powder coat EVERY last little part, bracket, angle, etc., or rely on appliance epoxy for some of the parts.

What items did you not powder coat?  Or, if easier, what items *did* you powder coat?

I'm intending to coat:

cabin frame

flaperon control tube

flaperon pushrods (4)

Y-stick

the other long control-stick-related parts (sorry; can't recal exact names)

motor mount brackets (4)

seat backs

landing gear brackets

nose strut (after converting to new donut suspension)

Anything I should *not* coat?

Thanks for your experience!

Views: 466

Reply to This

Replies to This Discussion

Powder coat looks nice, but it will hide a possible crack that could lead to disaster. If it is painted the crack will be visible. I have seen things that were powder coated that were hiding fatigue and cracks.

I was intending to paint the motor mount for that exact reason. I don't believe anything else comes close (I say that in ignorance). Perhaps the landing gear fittings, but they're so heavy-duty...

We had all of our steel parts powder coated, but epoxy is probably fine.  I'd defiantly powder coat the cabin frame and Y-stick.

If the part was hidden from view, I used a rustoleum primer and left it at that.  If visible I powdercoated.

Knowing what I know now, after having all my steel parts powder coated and a few years of flying experience, if I were to do it again I would go with a quality 2-part urethane epoxy primer and finish paint. The powder coated parts do look nice, but... It can get too thick, tends to de-laminate at sharp edges like we have on the gear weldments, and I agree with Jerry on the fact it can hide a crack much better than a 2-part epoxy paint would. Just my opinion.

We decided against powder coating and used a strong epoxy primer instead, followed by a top coat.

While it is super convenient to simply have the parts coated and while powder coat is also very wear resistant, if has some significant disadvantages:

- It doesn't bond with the underlying metal like epoxy primer, rust can grow under it, what is particularly a concern on edges like the gear brackets.
- Rust or cracks might be covered for quite some time until they become visible.
- Damages (chips, rust, etc.) can not easily be repaired.
- Powder coated parts cannot be painted, removing it is a SIGNIFICANT paint in the neck. This might not be a concern now but what about in a few years when particularly the exterior parts start to show some wear?
- The added thickness might create headaches, for example on the gear bracket attachment for the wing strut.

Oliver

Good points by Jimmy and Oliver (and the rest of you as well!).

Here I thought I was required to powder coat (as in, std practice).  I've backed-off my expectations, but will still do some. Probably the cabin frame, Y-stick, and seat backs, just because of the "handling" wear.

Thanks again!

Steel parts that are to be powder coated should be primed first.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service