Danal Estes's Comments

Comment Wall (5 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 10:00pm on November 29, 2017, David J. Beaulieu said…

Thanks Danal,

I used SavvyAnalysis to look at a couple of my log files off the Dynon.  Seemed relatively easy to upload and signing up and allowed me to look at CHT and EGT on all four cylinders for my UL350iS.  May take you up on your offer and send you a file after a get a bit more flying in.  Thanks for the quick reply!   Dave

At 3:44pm on April 8, 2013, Bob Nicholas said…

Ended up with a 280 main and a 2.90 needle jet. Angled the carb float bowl a few degrees toward 1 3 5 cylinders. Right now all is good exce

pt #5 a little hot EGT and #6 a little cool. Running the Whirlwind GA prop at 15.5 degrees. Pulling 2950 to 3000 rpm at full power 60 mph climb. Next step will be to put the fins just in front of the carb intake to hopefully smooth out 5 & 6. Hope to then go back to 275 main. Cylinder Head Temps smoothed out after the rejet. #1 is running a bit cool.  Hope this helps. Feel free if you have any more ? Is your 750 flying? Bob

At 6:09pm on February 11, 2013, Stephen R. Smith said…

Hello Danal,

I just notice your friend request, sorry.

Steve

At 8:13am on October 29, 2011, Conrad Watters said…

Danal, Rick's plane is only a few km from the Can Zac hangar 41 at the  Kitchener Waterloo airport.

I would suggest that you call Mark Townsend, 519 590 7601, in order to ensure that he will be at the hangar. Good luck with your adventure. Conrad

At 12:57pm on September 4, 2011, Bill Carter said…

Welcome to the family.

I wish you the all the best with your project. If you ever get the chance to visit the Zenith factory please take the time to stop by our builder assist facility too. We are their newest and nearest builder assist facility and like to have visitors. We are right here in Mexico, Mo., not far from the factory.

Take care and good luck,

Bill Carter

American Light Sport Aircrafters

Builder Assist & Assembly Center

www.LightSportAircrafters.com

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service