I'm looking for some reliable numbers on how much paint I'm going to need for N167EZ.  It is time to cover the primer.

I look in some places, especially at the RV guys, and they are saying that they're using 5 gallons on one plane.  I did see a poster here saying that he can get a plane covered with a little over a gallon.

My question is, "Where are those guys stashing that 5 gallons, and WHY?"  That is enough paint for a HOUSE!! And it is ridiculous expensive.  Why would they want to carry the extra weight around all the time.

I'm looking to use an automotive enamel from Kirker. $375 for the paint an prep cleaners.  There are better paints, but I about choked when the Sherwin-Williams guy quoted me $1,057 for two gallons.  I'm going to fly around in this thing... not sit and worship it.

I'd like to hear from anyone that needed more than two gallons of paint for one 601.  Notably, I'd like to know why it took so much.

Views: 812

Reply to This

Replies to This Discussion

Looks good Brad! 

A member of our local EAA chapter and his son attempted to wrap their plane and they said it was so difficult they gave up and had it painted.  I saw plane before painting and it was meticulous.  It also had hand controls for rudder and nose wheel steering as his son is a paraplegic.  Pretty nifty engineering.

I had my rudder wrapped professionally and it looked so bad I pulled it off.  You must really be good at this.  I am having mine painted a piece at a time and all is completed except for wings and they are in paint shop now.  It is solid white and I hope to use decals to add color.  I will be putting more in here or perhaps a separate post about the particulars of the paint and the decals when complete.

Joe - it's really not that hard. Make sure you use the automotive film and not the commercial film - and way different stuff. You just tack one end down and strech out the other end and squeege it down to the surface. You can pull it up if you don't like the sway it went down. You can stretch it where needed, the hard part in when you have to much material.

I am getting ready to paint my 601XL also.  I’m going to use the Stewart Systems paint.  It is aircraft paint and they have great instructional videos online.  Just bought my HVLP sprayer today.  Will be going to Sun n Fun is a couple of weeks and will stop at their booth and get expert advice regarding amount of paint.  I’ll keep you posted.  By the way, I checked into Plane Vinyl to have my plane wrapped and they told me they don’t do it anymore because there was problems with it coming off the control surfaces.  They would do a partial wrap but it was way too expensive.

One more thing, the Stewart Systems paint is a water based primer and a water borne top coat.  No toxic fumes or special respirators needed.  The polyurethane paints I was looking at required a separate fresh air breathing system.

I've had N167EZ painted for a few weeks now, but I've just got the N numbers applied and my beautiful wife was kind enough to take pictures today.  I used metallic silver enamel over a gray primer.  I hear I might have to repaint in 5 years if I leave it outside, but I have a hangar, and at the cost difference between enamel and polyurethanes, I can afford a new coat every now and then.  The whole job cost me under $300, which I think is appropriate for a $15,000 airplane.

I was able to cover the whole plane with one gallon (paint plus hardner) of primer and one gallon of enamel (paint plus hardner).  I use the maximum amount of thinner to get the minimum coat thickness. 

The N numbers are from a local sign shop.  Cost me around $100 and took about an hour to apply.

Attachments:

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service