Anyone have experience using SealAll in fuel system, such as coating or replacing cork gaskets?   SealAll

Views: 336

Reply to This

Replies to This Discussion

I have used Pro Seal on two planes, one has been sealed for about ten years, no problems at all. It is a bear to use, get on everything and hard if not impossible to get off anything it touches, but it seals great and resist ethanol You can buy small amounts from Vans Aircraft. If your primary goal is to seal a fuel tank, I don't think it can be beat

Thanks Gil

your welcom

Not sure I’d use it on a gasket or gasket surface that I hoped to get apart again… I’ve used Van’s to seal up things on my header tank fittings and it is everything Gil says – with good surface prep it sticks and doesn’t budge…  

Lawrence, as for not being able to take apart again, are you talking about ProSeal or SealAll?  

ProSeal or Van's equivalent... http://www.vansaircraft.com/cgi-bin/store.cgi?browse=misc&produ...

Sorry, no experience with SealALL

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service