Hi Gary. Thanks for your info I will try your tecknea and see what happens, I have a 3300 jabiru engine which is lighter than yours.

As I said I am new to the site and in future I will post on the blog.

Thanks again Gordon

Mine is a 601XLB LYC 235 L2C

Hello Gray,

Anxiety could be tough. I would keep in mind that the plane itself is very unlikely to let you down.  The 601 is very simple and since the wing upgrade, they don't ever fail.  The most important component in an airplane is the engine and the most important thing to keep the engine running is fuel.  You don't need the miles of wire and gauges to work.  They are not needed. A running engine is all you need.

However in a Zenith 601 you often don't absolutely need the engine, because they touch down at a reasonable speed you can dead-stick it in, not that there is often any need to do that - hasn't happened yet in my 2,000 hours.  Its just that the survival rate in off-field landings in slow airplanes is much better than fast ones.

Its good to have a plan for engine failure and when you become comfortable with the plane, you might want to practice dead-stick landings.  No need to turn off the engine, just idle it back, come up with a plan and see how it works out.  Do this over and over until you understand what works and what does not.

Steve

Hi Gary
I am happy with the warp drive, the sensinich 68x57 factory supplied
Prop was too much pitch for a 0-200
My climb is better, much less vibration, top end about the same.
Three blades look better too.
Daryl at warp drive is great, terrific customer service.
Give him a call with your needs and he will tell you what he suggests for your application.
The spinners are made by a Canadian outfit, quality not up to the same as the warp drive prop in my opinion.
Dave

Yes I have been thinking about it for two year. It was good to see the ideas materials over a couple of days. I would like to see the final product also. As usual waiting on parts :)

Thanks Gary,

Hi Gary,

I'll pull the prop out of the shipping box tomorrow and get you a weight. 

Hi Gary,

You asked a question about connectors and now I can't find the question. Was it about the 90 deg crimp on connectors? I may have to go down to the airport hangar where I have them to find that out. Most of the other electrical pieces and parts is from BandC.

http://www.bandc.biz/electrical-supplies.aspx

Including their crimp tool. The 90 deg connectors take a different jaw insert for the tool than the straight crimp ons.

I see you are from Cloverdale. Nice place. We bought the kit from Doug there and have been back several times. Once for the fly-in open house.