Builders,

I am just curious.   The Zenith site  reads as though rivets have be to pulled by dies that unique made by Zenith, is that accurate?   I do not see these rivet gun heads for sale on the Zenith site?  Do they fit most common rivet guns on the market?

Charlie

Views: 1092

Reply to This

Replies to This Discussion

I just had to buy a replacement A4 head because I lost mine. They don't list them on the website but if you call or email them they will gladly sell you one or two.

I can't comment on the latter question, only ever used the rivet guy they supply.

Thanks for the quick reply.   Once in a while there are good commercial rivet guns go for a real good price, and I wondered if the Zenith heads will fit them, or if they are really that much different?

What do they charge for the head(s)?

$11.90 per head.

That  helps.  thank you.

If you find a gun that you like, you can send them the heads from the gun and they will machine them for you. I did that and I think it was less than $10, and they got them back to me pretty quickly too. I'm pretty sure they will give you the dimensions so you can machine them yourself too.

https://www.youtube.com/watch?v=-FfdJPOM51A

get someone to machine them for you

that is what i am going to do

Good link, but unless you have a lathe or someone who works for free, I doubt you could come out ahead if Zenith sells them for less than $12 a piece.

I did like the link to the article by Chris, as well.

Thanks.

Charlie

You do not need to by their rivet gun but if their tip don't thread on to your gun you can send them your guns tip and they will  modify them so you can pull the rivets     

Good to to thanks.

super easy to make, heat the head cherry red (propane torch will do it) then drill with 135 deg drill bit until approximate depth stick head in drill and polish with emery cloth. done, done. Like the instructions say, marks on the rivet, drill a bit deeper, marks on the skin, grind a bit off.

What instructions were you referring to? Do you have a link?

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service