SOLD... NEVER USED Sky GuardSold...... ADS-b in out transceiver still in the box $695.00 2020 complian

UP FOR SALE

Never used SkyGuard  TWX.  SN 320, date code 10/13.  I bought this unit at Sun N fun but never got around to installing it into my 601 XLB.  I no longer have aircraft so it's time to let this go.  I also bought an I-Fly 720 to pair it with but this unit will work with any of the popular apps, ForeFlight, Wing X, Garmin, ETC.

I just sent this to SkyGuard for the updated gps and latest firmware in March 2016 so it's current

I paid 1350.00 for it and will sell it for 695.00 OBO.  You can also go on line and download an installation supplement to permanently install this is so desired.  Again this is brand new never powered up.  Feel free to e-mail me at flyguy1117@aol.com . 

I'm happy to send additional info, photos, and a PDF of the manual if interested just drop me a line. 

The note pasted below is from the installation manual that came with the unit. Per Skyguard this unit is 2020 ADSB compliant for SLSA, ELSE, and Experimental with pending approval for certified aircraft too.

SkyGuardTWX "UAT/ES" ADS-B TRANSCIVER

Transceiver Setup

This Transceiver is a fully integrated 978mhz UAT and 1090mhz ES ADS-B radio transceiver along with a WAAS GPS and WiFi transmitter. The unit is powered on by plugging the provided DC power adapter into any aircraft power socket that provides either 12v or 24v DC with a minimum of 3 amps. There are 5 antennas (one - 9" Blue Blade on 4 ft. coax, two - 5" black, one - 1" black, and one - 4" black) and a GPS receiver that must be installed prior to powering up the transceiver. The GPS receiver "puck" is plugged into the ADS-B transceiver unit with the "arrow" on the GPS plug pointing up. The two 5" black ADS-B receiver antennas are attached to the outside coax connectors adjacent to and at same end as the GPS plug. The left side coax connection is the 978mhz UAT receiver port and the right side coax connection is the 1090mhz ES receiver port. The 4 ft. coax cable with 9" Blade antenna is attached to the center coax connector at the same end as the GPS plug. This is the 978mhz UAT transmitter port. The 4" black antenna is attached to the coax connector that is between the transmitter port and the 978mhz UAT receiver port. The 1" black WiFi antenna and the DC power adapter plug are connected to the opposite side of the receiver.

Views: 1066

Reply to This

Replies to This Discussion

The Manual is also available on the SkyGuard web site.

Looks like this is now SOLD.  If anything changes I'll send out an update.  Thanks for all the interest and inquiries.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service