Chuck Deiterich's Comments

Comment Wall (10 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 5:05am on June 18, 2021, Michael Mccarthy said…

Hello,

My name is Mr. Michael Mccarthy, I have contacted you before without any response from you. Please replied if you receive this message. I have something very important to discuss with you, I have a vital information to give you. Could you please get back to me on (mmichaelmccarthy4@gmail.com ) for full details.

Michael Mccarthy.

At 7:02am on August 30, 2015, ulis temos said…
Met one of your work friends yesterday. Email me at utemos@verizon.net
At 8:28pm on August 24, 2012, Cliff Stripling said…
Chuck. Thanks for the control rods offer. I am in Hawaii until Sept 14. I will call you when I return. Cliff
At 5:42pm on November 30, 2011, Thomas C. Chadwick said…

Hi Chuck,   The last e-mail I sent to you didn't go through.  Please send me your new 

address, thanks Tom.   tcchadwick@hotmail.com

At 11:34am on December 19, 2010, FRED BURG said…

CHUCK YOU CAN EMAIL ME FREDB@BEECREEK.NET

FRED BURG

At 11:32am on December 19, 2010, FRED BURG said…

LOOKS LIKE YOU AND BOB TURNER NEED TO SEE ME SINCE I AM IN THE MIDDLE HERE IN STONEWALL. I'M EAST OF THE STONEWALL VOR IN THE WEST SIDE OF US290 AND FM 1623 INTERSECTION--GOT 2400 FT GRASS NEXT TO MY HOME AND 5 RENT HANGARS. I'M A HAM SO I HAVE A 200 FT TOWER NEXT TO THE HOUSE. COME ANY TIME

At 4:30pm on February 5, 2010, Richard Rost said…
I wanted to thank you for your stool article in Kitplanes. I needed to come up with a colapsable stool to get my wife who has severe RA onto the wing of our 650. Now I don't have to reinvent the wheel so to speak. Thanks again. Rich Rost
At 8:31am on June 8, 2009, Paul Tipton said…
I would have liked to meet you. I keep my plane at TPL (Temple). I am slowly working on a strip at a place I have in Falls Co. between Durango and Lott. I looked at the Sonex that flew in.
At 9:53pm on February 14, 2009, Bob Turner said…
My place is 12 miles west of Harper on Hwy 290. I'm slowly working on a dirt strip that will be completed about the time the airplane is. With any luck I should be able to get a barn/hangar built also. The strip will start out at 500' depending upon how the flight testing goes (I can clear it on out to 1200' if I need to).
At 10:37am on February 10, 2009, Bob Turner said…
Hi Chuck - Bob Turner here. I dropped by your place about 3 years ago just as I was retiring and moving to the hill country. The new home is built and the 701 started in the garage. One of these days I'll give you a call and hopefully drop in to your strip and let you take a look at my project. Thanks for sharing your experience.

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service