Dear friends, I was very worried when last saturday during the pre flight inspection I found that the rudder had a considerable play (free movement) from left to right. I observed accuratly and I found that the aluminium profile that comes from the fuselage was broken or collapsed. I think I have to share this with you because this fail coul be fatal. I attach photos.
Regards
Lucas

Views: 1608

Attachments:

Reply to This

Replies to This Discussion

I think that I would paint that particular area with some neon paint to eyeball at every pre-flight...and post-flight

til there's a resolution

The plans call for those rear fuselage longerons to be 0.040". Those longerons in the photos look way lighter than this, maybe like 0.020". That would be the first thing I would be checking.

I am aware that I have exposed my plane to hard conditions (i.e. crossing the Andees ) but isn't it the ch701 a sky jeep?

That shouldn't matter. In my non-engineer (but I was an AME) opinion that bracket is too small and puts too much torque on the rear angle over too small an area. The upper bracket should be a longer horseshoe shape that extends at least 3x as long to distribute the forces more. Again, not sure what that angle is but it don't look too thick and I know that skin is maybe 20 thou? That's asking it too do a lot...
Lucas:
I will be checking mine even more thoroughly from now on. A few years back a 701 flyer had trouble with the stabilizer mounts cracking. His engine kicked and shuddered a lot when it was shutting down. He figured that that broke the mounts. .... Fred N9701 2005
Looks like damage from dropping it on its tail. Is there a chance it could have fell on its tail in recent past? There is another discussion regarding this type of damage http://www.zenith.aero/group/stolch701/forum/topics/tail-damage-and... If the rudder hits the ground it would put a lot of forward/downward force on the upper rudder hinge bracket

Dave

David, 

I  am sure have not hit the rudder tail in a take off nor landing maneuver, this hypothesis is discharged.

Ment your damage occurred with ground handling, furthermore I have inspected two 701's with more than 500 hrs. an saw no damage in the tail section. I did see one with damage similar to yours that was dropped on its tail during ground handling.
Good luck either way with your problem. I'm dismissed
Dave
I have seen that damage when a 701 was dropped on its tail during ground handling.
Dave

I would like to ask you all  if the planes that have had the same problem that I had,  use frequently the slip maneuver.

If all those damaged planes use a lot (which is my case) to slip, it means that is the origin of the problem. From the other hand if this damage is not present in planes that have not slip, it confirms the problem cause.

I don't think a slip would cause this.  I have seen aircraft bang their tails when tied down outside in high winds.  Could that have happened?

Tim

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service