Heat gun has no effect on the glue - so what's the answer for removing the labels and the left on glue from your new piece of metal?
Tia
Gary

Views: 2226

Reply to This

Replies to This Discussion

MEK or rubbing alcohol. Soak the label, let it set for a couple minutes and they'll peel right off
I soaked a paper towel or rag with MEK and set it on the label for a few minutes.

I use a phenolic chisel with a sharp edge..It gets under the label and scrapes it right off dry, then some mek for the residue.. The phenolic doesn't mar the surface..   Cheers,, Tom

acrylic thinner (for thinning zinc chromate). squirt a bit on, wait a couple seconds and it slides right off with putty knife or any edged thing. a little more thinner to wipe off residue and you are good to go.

Thanks for all the suggestions guys and girl!

3M General Adhesive Cleaner 08987: [Link to Amazon]

goo be gone from ACE

Just plain water for a minute works just fine, scrape off with fingernail and remove any residual glue with a little acetone.  Quick and easy.     Cheers,,, Lynn       Once upon a time, Croc 9

I got a can or two of Brake Cleaner from any auto parts store. Spray on a little bit to wet the label, in a couple of minutes, it wipes right off.

Lacquer thinner - just saturate the label, wait a minute and it peels right off.  Also removes any marks you make with sharpie pens.

I used lacquer thinner also for all my parts. Worked great. Only other thing tried was alcohol which doesn't do nearly as well.

Just wipe with Lacquer thinners

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service