I would like to hang my partially finished wing from my garage wall or ceiling so I may proceed to the next wing and then fuselage. I would appreciate ideas about the best way to accomplish this. I've thought about a canvas sling,electrical conduit, plywood shelves with foam padding what have others done?

Thanks

David

Views: 351

Reply to This

Replies to This Discussion


Hi David. I hung my wings from the ceiling. I made sure that my "I" bolts were in the ceiling joist, and I used PVC type pipe with cargo straps running through them. I also ran a "backup" wire through the pipes and secured them independently just in case of a failure.  The PVC pipe is flexible and it allows it to conform to the bottom of the wing.

Hope this helps! 

I used seat belt webbing and hung my wings vertically from the rafters.  If your ceiling is like Steve's, then something like he did looks like the way to go.  Just make sure your eye screws are screwed into a rafter :-)

Tim

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service