Chris Craver's Comments

Comment Wall (14 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 4:56pm on August 8, 2013, David Griggs said…
Hi Chris,
I am trying to do better with posting my progress. I get to busy in the garage to sit at the computer.

Dave Griggs
At 9:09pm on April 14, 2013, Frederick Schutt said…

Hi Chris

 

Boy, that was fast!  I didn't get to ship it until Fri AM-  They told me you would receive by Tues of this week.  The gallery oil plugs are not in tight in the case- just enough so they don't get lost.  Also- did you find the thru bolts and nuts wrapped in cardboard?

I'm working on installing my throttle quadrant in the center console and all trim and flap switches located to the rear of the quadrant.

 

Thanks again- Fred

 

At 8:35pm on April 8, 2013, Frederick Schutt said…

Hi Chris

I had forgot that i had the bell housing cut down for a front cover and would have sent it along at no cost.  I had misplaced the gallery oil plugs so stopped at corvair ranch today .

I had Dan Weserman install his new one piece 5th bearing and his new mfg billet crank on a case I shipped to him.  If you decide that route, it takes awhile from ordering till it is completed.  I have'nt received mine from him yet but it is now ready.  If you have questions on his work- let me know.

Will get your package off to you in a day or so.

Thanks- Fred

At 6:36pm on April 7, 2013, Frederick Schutt said…

Hi Chris

Received your check-Thanks- Will get to UPS Monday or Tuesday to ship.

I have a question for you- are you planning on installing a 5th bearing?  If not, I have a bell housing that is cut down to size for the front end cover- could easily be packed in the same box.  Also, do you have a crank?  The crank I listed is still available.

Thanks again -Fred

At 7:36am on April 6, 2013, jerry nichols said…

Don't mind at all.  If you can sell the picture at a profit, we'll split the proceeds!

At 9:33am on March 30, 2013, Frederick Schutt said…

Hi Chris

If you are interested in the corvair case -give me your address you want it shipped to and send me a check or money order for $110.00 - 80 + 30 for shipping and I'll get it off to you.

Thanks- Fred Schutt - 76 Opossum Hill Rd.- Aspers, Pa 17304

At 7:29pm on March 27, 2013, Frederick Schutt said…

Hi Chris

 

Checked with going postal -  can ship to your area for approx $30.00 max

 

Thanks-Fred

At 7:36pm on March 11, 2012, Chris Craver said…
Final fitting of nose skin. Drilled  and clecoed. Deburring now.
At 7:29pm on February 18, 2012, Chris Craver said…
Rudder skeleton done today. Start rudder skin next.
At 8:31pm on February 2, 2012, Chris Craver said…
Tail kit arrived today! Excellent! Should get the inventory done over the weekend.
At 7:02pm on January 16, 2012, Chris Craver said…
2x2x4 tubes have been had. Ordered tail kit, vortex generators and cortec today. 
Won't be long now, I'll actually be doing some work!
At 6:55pm on December 21, 2011, Chris Craver said…
Anyone know right quick what size ratchet straps are needed? "Santa" needs to know!
At 12:48am on December 15, 2011, Russ Harris said…

Hi Chris,

     I commend you on your choice of an airplane, and wish you the best of luck with your build.  Thank-you for your kind words about Montana.

                                               Russ

At 10:58pm on December 9, 2011, Bill Carter said…

Welcome to the family.

I wish you the all the best with your project. If you ever get the chance to visit the Zenith factory please take the time to stop by our builder assist facility too. We are their newest and nearest builder assist facility and like to have visitors. We are right here in Mexico, Mo., not far from the factory.

That is some beautiful country that you live in.

Take care and good luck,

Bill Carter

American Light Sport Aircrafters

Builder Assist & Assembly Center

www.LightSportAircrafters.com

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service