canopy pivot point ? 601xl

Installing the canopy frame rails and unable to find the measurement from the firewall web to the canopy pivot point on the top logerons in my 2005 plans.  I already have the engine and mounts installed and room for the canopy hinge brackets is limited. Needing to make the canopy hinge brackets because of the custom made corvair motor mounts. Looks like about 100 mm but need to be sure. Thanks Dan

Views: 193

▶ Reply to This

Replies to This Discussion

Permalink Reply by Jacky Winters on October 6, 2012 at 10:28am

measure the 6B6-4 that came with your kit.  If it is the one with the bolt welded to the front and has the pivot point upright attached, that will allow you to determine the distance.  I think.

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service