51% rule and outside builder help

I have almost all the parts of my 750 kit assembled. But, I got sick and have not been able to complete the kit.  First, since I have already assembled  the parts (wings, back fuse, rudder, flaperons, stabilizer, etc.) and all that is needed is putting the parts together and add the panel and engine kit would what I have already done be 51%?  Second, I have seen where there are companies that will help in assembly, does anyone have a list of these companies.  Your help appreciated, Joe

Views: 424

▶ Reply to This

Replies to This Discussion

Permalink Reply by Bob McDonald on March 12, 2012 at 6:59pm

Mark Townsend at Can-Zac Aviation in Kitchener, Ontario, Canada. Assembles kits, builds panels , engine installs, and does builder assist. Very experienced builder of Zeniths. Assembled at least 7 CH750 kits + 3 CH601XLB + 2 CH701 kits + CH801 in the past 2 years. Builder assist at Can-Zac has your airframe going to the paint shop in 3 weeks. Example - Built both my wings complete in 5 days, and the entire fuselage in 18 hrs. Mark's number 519-590-7601. He has an upholstery & paint shop (local) that put the finishing touches on your completed aircraft.

Permalink Reply by Tracy Buttles on March 12, 2012 at 7:08pm

http://www.faa.gov/aircraft/gen_av/ultralights/amateur_built/kits/m...

go through this file and you might have to get the form from Zenith , i havent been able to find it on the FAA site   , you are close  but might need some more work to reach (the letter of the law!)

 

I do builder assit if you might need any work done to finish your zenith

Im in NE Wisconsin , but their are other across the country

 

 

Tracy Buttles

Permalink Reply by Zenith.Aero on March 13, 2012 at 8:35am

Where are you located?  There are a number of builder assist companies that specialize in Zeniths.

Permalink Reply by Joe McGough on March 13, 2012 at 2:45pm

I am in South Alabama. Thanks, Joe

Permalink Reply by JEFF COCHRAN on March 13, 2012 at 6:59pm

Here is the completed form with the Zenith portion filled out.

http://www.faa.gov/aircraft/gen_av/ultralights/amateur_built/kits/nket_l
ist/media/STOL_CH750.pdf

Figure out what % you did and then how much is left for outside assistance.  

There is a builder assist group at the Gadsden airport but I don't know anything about them.

http://www.aerocraftersofal.com/index.php    How far south are you?

Good Luck,

Jeff

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service