Joe Harrington's Comments

Comment Wall (39 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 12:38am on February 14, 2013, Chumphol Sirinavin said…: Hi, Joe, Glad to meet you here. I'm looking forward to meetIng you in person soon.

Champ
sirinavi@yahoo.com

At 1:20pm on January 31, 2013, Mike Hammond said…: If you are driving to Sun N Fun I am about three miles off of I-95 in Pooler Ga.

At 1:08pm on January 31, 2013, Mike Hammond said…: Joe, I am not trying to talk you out of buying my engine, but If you just need top end work on your engine you may be better off buying cylinders for your engine. If you have bottom end troubles you will probably come out better buying a good serviceable engine. If you bought mine you could use it as is and use the extra parts to overhaul your engine. Then you would have a spare, or you could sell one of them and recoup some cost. Let me know. Mike H.

At 9:23am on November 14, 2011, Joseph Begany said…: Joe

Are you guys fabricating the cages or are you buying them from Zenith? Did you have any issues with mating the cage to the built up frame? There is a plans builder in the forum section that had trouble getting everything lined up with the cage.

The Fuses look great. A real milestone.

Joe B

At 11:28pm on May 23, 2011, david shrader said…: Hey Joe

I think ur ahead of us although one tail is done we just started the fwd fuselage. I'm glad to hear u guys are on track

Dave

At 5:54am on May 21, 2011, david shrader said…: Hey Joe
How goes the battle we've finished the wings 6 and tail feathers for all three planes... One aft fuselage is done and were going to stay with this one to completion. I hope your group is makeing progress

Dave

At 12:15pm on December 13, 2010, Joe Spencer said…: Hi Joe. thx for the friend request. sure, that's good.

the 701 is an interesting little plane...it's ripe for experimenting on improvements. and no matter it's faults, there's nothing else out there that i'm aware of that will get in and out like it will

thx again

joe

At 10:07pm on November 29, 2010, Ken Ryan said…: Yes the header tank with the warning light is a good idea. When that light goes off you know exactly how much fuel is left. FYI a friend who has built two RVs says they have the same setup ... one fuel pickup at the rear. Ken

At 11:14pm on September 21, 2010, phillip maples said…: we can be friends but no levity....thanks

At 5:36pm on September 21, 2010, phillip maples said…: Joe, it was so obvious once you pointed it out. i don't think Big Brother has a sense of humor.
thanks, phillip

At 12:02pm on July 17, 2010, Paul said…: Hey Joe thanks for the friend invite. It is going to ba a challange to scratch build, but I am up for it.

At 9:18pm on March 30, 2010, Leo Arrigo said…: Hi joe,

I have heard that the inspector in this area likes to see all surfaces primed so I think that is the path I am going to take.. Should'nt add too much weight.

Thanks for getting back to me..

Leo

At 10:22am on March 28, 2010, Leo Arrigo said…: Just wondering if when you are priming, are you priming just the mating surfaces or all of the internal componants covered by the skin. A friend of mine who is building a 701 sais that the mdra inspection requires it..Do you know or have you heard that this is true.

At 3:04pm on October 12, 2009, Lawrence Van Egmond said…: Hi. Joe. Can I be your friend to?

At 2:02pm on September 1, 2009, Steven Ward said…: Hi Joe, you said that you've had problems with the horz stab nose ribs, I have all the parts done for the stab but the spars. If all of you had the same prob, I guess I will too when I assemble the stab. Thanks for the heads up.

At 6:43pm on July 20, 2009, Lawrence Van Egmond said…: I won't even comment on that.

At 11:54am on June 19, 2009, Dave Van Dyke said…: Hi Joseph. Whats that on your wall? Looks like it needs a good cleaning. FLiar 7

At 4:06pm on June 9, 2009, Travis Corbin said…: Against my better judgement, Batman says I should be your friend! ~FLiar 3

At 11:13am on June 9, 2009, Glen Brown said…: Hey Joey, wanna be my friend? Looks like 4 out of the 6 liars have finally made it on here. Can only mean trouble........

No comments yet!

‹ Previous
1
2
Next ›

Welcome to
Zenith Aircraft Builders and Flyers

Sign Up
or Sign In

Or sign in with:

New from Zenith:

Zenith Planes For Sale

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

West Coast USA:

Pro Builder Assistance:

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Badges | Report an Issue | Terms of Service

Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).