Has anyone filled the holes in the pop rivets? If so, what material is used?

Views: 445

Reply to This

Replies to This Discussion

I say you would be wasting a lot of time trying to fill them. It does virtually nothing to help either appearance or functionality of the rivet. I'd move on to other more important things than this. Just my humble opinion.
I have never even considered filling holes until the other day when someone asked what I was going to do about them. I like your opinion Larry. :-)
Hi Joe. I follow several different websites and this subject came up. An A & P said what I told you that it does nothing to help the plane go faster. He went on to say if you didn't use some type of epoxy in them, chances are it wouldn't stick in the hole. He asked a very simple question too that shed good light for me. His question was: If you ever need to drill out that rivet for replacement, how is the drillbit going to center itself so the rivets comes out precisely? That was all I needed to read. Even after that statement, you should have read all the bantering that went on back and forth. It got to the point that too much testosterone was being tossed around and the main point was totally lost. I for one stopped reading the posts and decided to get out to the shop to do something CONSTRUCTIVE with my time like drill more holes and pull more rivets. :) It sure did put me another hour closer to my final goal!
Thanks Larry!
I remember reading about someone who not only filled the rivets (with plain ol' bond I think) but also took the time to put a little depression in the center of each one so it appeared to be a solid rivet! They said there was no appreciable performance difference, but it basically eliminated the comments from people looking at his plane and asking why he used "pop rivets" instead of "real rivets".....

As fo the comment about drilling rivets out, I can't believe that epoxy or bondo would give enough resistance to make the rivet drill off center. That sounds like an off the cuff comment from someone that's trying to bolster his opinion. That would mean that the plastic (epoxy or bondo) had the same structural strength as aluminimum. I don't think that's true. Unless maybe you used JB weld or something....

Basically though, I think it all boils down to aesthetics and how you want the plane to look...

Remeber rule number one: FLY the plane.

Looking at airplanes is for later! LOL Good luck and whatever you choose I'm sure it'll come out great!
It was to bolster my point and you did pick up on it. As I said before, for every rivet I would take the time to put whatever in the hole, that is one more second, minute and hour I would be that much closer to flying the airplane. It does all come down to aesthetics and choice. I wouldn't discourage anyone to not fill their holes if they are so inclined. That's what makes each of our aircraft unique and different from all the rest.
Joe

Just a quick note and im shure this is not the case but just in case it is. If the rivit stim is gone the pop rivit should be replaced. When u said filling the holes i think were all thinking that u ment cleaning up the heads, cause if the stim is gone the strength is compromized.

I my self love telling anyone its almost all pops then explaining there is strength in numbers 1 bolt, 3 solid rivits or 5 pops (forgot exact #) Its all the same.

Dave
hi joe did yoy find out anything about filling the rivet holes ,,joe
I think I learned not to do it. :-)

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service