Does anyone have an idea on how to compress the gas springs that hold the XL/650 canopy open? It looks like the end one the fuselage needs to be in place, then the spring compressed, and the other end put in place.

 

I don't have the oompf I once did, and I can't compress them at all. Ideas/solutions will be appreciated..

Views: 1305

Reply to This

Replies to This Discussion

Jim,

              Open and hold the canopy. Put one end of the strut on the canopy stud. Lower the canopy till the other end of the strut will slip on the stud on the longeron. The struts are under high pressure. No need to attempt to compress by hand.

 

                                                                                                                                                                 Jay

I used a bar clamp, one of the quick clamp models with rubber pads, to close them on the bench. You should be able to fabricate something to hold them in the closed position to figure out where things need to be. Or just measure the closed position and place the end mounts to that dimension.

I can't fully extend the canopy in my shop, which is probably why the solution wasn't obvious. I wound up putting the gas springs in place, with the front canopy bolts out. I managed to push things in place, had my wife hold them, and inserted the bolts. So it's really a variation of the suggestions I received.

 

Thanks for the ideas, guys!

I also found out that if you have your plane in a garage, do not leave the canopy 1/2 open. It will destroy the gas strut. Leave the canopy fully open or closed. It only took a few weeks for the struts to go bad. Also, if you have a 601, you might want to change to the 60lb struts. With the 40lb struts and out in the wind you might be supprised how many times that the canopy will auto close on your head or your arm.    Alan

Good information. Thanks, Alan!

Anybody tried a 60 pounder on the pilot side and a 40 pounder on the passenger side?

 

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service