Made a knife from the Larry Zepp plans: ttp://www.zenith.aero/profiles/blogs/aluminum-knife-plans-in-pdf-format<br /> <br /> Seems to work really well!

Comment

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

Comment by Jason R on September 7, 2017 at 6:09am

I have an excellent large bandsaw for thicker items, I'll be limiting this cutter to long cuts up to 0.040.  I tested it yesterday on a small piece if scrap and it seemed to do well.  I can always fall back to the Olfa if needed :)

Comment by Damon Brantley on September 7, 2017 at 6:02am

I made one myself a few years back. It cuts well for thinner sheets, but for deeper cuts I had problems with getting ripples in the cut. The blade started snagging on those ripples and I could not cut any further. At that point I switched over to shears or my panel hacksaw.

New from Zenith:

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


New Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


New Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz.

Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

 

Zenith transition and Sport Pilot training:

Quality Sport Planes
Cloverdale, California:

Wheels & Wings

Pro Builder Assistance

© 2018   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service