Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Drilled for throttle and fuel line through console and center channel to baggage area.<br /> Still waiting for Honda block adapters for oil sensor
Comment
-
Comment by Terrence "Dr. Terry" Hall on May 2, 2017 at 5:49am
-
I am waiting for order, but it appears the Honda engine block is tapped with 1/8 BSPT and not 1/8 NPT(for the sensor) I purchased adaptor and 1/8 npt 45 to fit next to back engine mount. It appears others just jam a 1/8 npt into 1/8 BSPT thread successfully?
The BSPT thread is slightly different than NPT but this problem is known in the Honda hot rod literature for aftermarket sensors in Hondas.
-
Comment by Glenn Davis on April 30, 2017 at 6:56pm
-
Terry,
What block adapters are you referring to? I'll be using the 130 engine as well with Dynon. Is there an adapter plate needed?
Thanks
Glenn
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers