Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Trip half done,14days,7 in air,40 hrs,2600 miles Ottawa to Vancouver island ch 750 working well upgrades in Vernon,BC @ Skytek and Rotec
Comment
-
Comment by Joe Harrington on May 31, 2015 at 12:37pm
-
Yeah, both Rotech and Skytek are top notch guys. Hope your trip is going well and you are having heaps of fun.
-
Comment by Conrad Watters on May 30, 2015 at 10:41pm
-
Joe, I was in Vernon for four days. Skytek put in nylon slide plates to protect rudder cable chaff against fuselage, rudder front wheel sliding plates with swivel plate and rebuilt brakes.... Wrong pads had been ordered in Ontario.
Rotec .. Changed Evans to prestone coolant, changed throttle cables from Johnson bar to carbs, oil and filter, heat shield between exhaust and coolant hose, re synced carbs, balanced prop- actually it was very close,replaced 90' angle connector to oil rad with better curved connector...... It is good to have another set of eyes have a check of the systems every so often. I was pleased with service of both Skytec and Rotec
-
-
What are getting done in Vernon?
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers