Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Installed and tested dual flap controls. They work great!
Comment
-
Comment by Daniel Niendorff on November 14, 2014 at 9:02am
-
I set up my throttle to operate with my left hand, and a flap rocker switch sitting just above it so that it can be operated with the thumb. The co-pilot position has the same throttle and flap rocker setup with the right hand. Both positions can operate throttle and flaps and keep their hand on the center stick. Both flap switches are active at all times, through a composite designs trim relay board. I used a set of diodes to handle the limit switch current reversal, instead of a DPDT switch. It works like a charm. This is going in an 801, so the panel is wider than the 701 and 750.
-
Comment by Bryan Walstrom on November 14, 2014 at 8:19am
-
Dual flap controls??
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers