Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
-
John dobbins
- Louisville, KY
- United States
- Blog Posts
- Discussions (73)
- Events
- Groups
- Photos
- Photo Albums
- Videos
John dobbins's Discussions
Zenith 601XL brake mechanism protrudes below bottom of wheel rim
Started this discussion. Last reply by Matthew walker Mar 6, 2014. 3 Replies 0 Likes
Part of my brake mechanism protrudes below the lowest level of the wheel rim. That means damage could occur in a flat tire situation. It looks like a brake fluid orifice is at the lowest point on the…Continue
601xl nose wheel/rudder interaction
Started this discussion. Last reply by Don Burkholder Feb 22, 2014. 3 Replies 0 Likes
I find that the V inset of the nose wheel crossbar bearing surface introduces a lot of friction and interference with the rudder. Ideally, the rudder should be completely free so the pilot has…Continue
John dobbins's Page
Profile Information
- Aircraft Model
- ZODIAC XL
- Project Status
- Flying
- Building From
- Purchased finished aircraft
- Building Experience
- No Experience
- Flying Experience
- Commercial / CFI
- Building and Flying Info / Your Profession / Other Background Info
- Retired electrical engineer. Commercial, instrument, multi, CFI ratings. Previously owned a Cessna 170B.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
Comment Wall (2 comments)
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers
Thanks, John! After I get my alternator back on, I'd like to take a look at yours to make sure I have all the wires right. If you would, call me on my cell 594-3049 and we'll arrange a time to meet .
Hi John,
The brakes can be installed at the front or the rear. The builders manual with the photos recommend the brakes be installed at the rear.
My SLSA has the brakes attached to the front of the undercarriage, However the undercarriage looks slightly different from the kit that I am building now.
You have a good point about the brakes protruding. The brakes are at an angle either at the front of behind and I think the tire must have to be really flat before the brake contacts the surface. I am very curious now you have mentioned it and will send some pics tomorrow, I will take a measurement of the clearance as I am very curious with this topic.