Hi Alan. I have scratch built a 701 and currently live in NE Victoria, Yackandandah. I am moving to Townsville in January 2013. Love to have a chat. I have about 130 hours on my 701. I am about to bring it home to make some minor modifications.
All the best
No, I haven't done the beanie mod. I am scratch building a 750 and decided it didn't really need it because the windshield/roof junction is fairly gradual. Now Zenith have done their own beanie mod to the Edition 3 CH750. I might incorporate their changes.
My idea was instead of forming an aluminum sheet rib like in the wings (as per Joe Spencer's mod), I would use some half inch aluminum tubing and bend it to a rib profile and place it in the middle of the cabin roof and rivet it to the lexan. This would provide some additional stiffness. The tubing that I am talking about is the type often used as wing rib battens used in ultralight aircraft. I have some from an ultralight that I had that received damage to the wings. I am not sure this would work well; just an idea that I had.
I will take some specific photos for you toomorow but what I have done is to use the Jabiru fibreglass elbow and a piece of scat hose. I am not happy with the setup and will replace it with a Donaldson air filter rubber hose or similar. Many have done this and some have added an aluminium vane inside to straighten the air with RPM results. Jabiru are working on something very similar at the moment so keep an eye on their website.
HI alan, sorry, I am very slack at keeping in contact! How is your project progressing? Did you eventually get your parts from Zenair Australia? I also had big trouble getting the wheels to hold air, I eventually ended up putting a bead of sikaflex round the wheel halves before joining them and physically pressed the o'ring down into the extruded stuff around the joint. that seems to have worked, at least for the first time ever the tyres haven't gone flat in a week! Right now I'm trying to figure out what size the slots in the fuselage need to be? plus and minus 13 degrees for the aileron and then an extra 15 degrees down for the flap? have you reached that stage yet?
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.