Ken Szewc's Comments

Comment Wall (12 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 11:13am on July 7, 2010, Ron D Leclerc said…
G'Day Ken...
Nice to see that you are building a 701... how far along are you? You said you had some questions on wing!

Ron
At 11:09pm on June 11, 2010, Cedric Schieber said…
Hi Ken, I have Thursday, June 17 scheduled for the a/c inspection by a DAR. There will be 4 planes inspected by him. It has been a long time coming, since 2003. At last success... Will send you a note after the paper is signed, Yea.
How are you doing?
Will have a hanger at Illinois Valley Airport for the time being, had a great friend that arranged the space. Take care buddy. Cedric
At 6:28pm on May 9, 2010, Terry Hagel said…
Oops, make that the upper left corner of 7-V-11. Terry
At 6:26pm on May 9, 2010, Terry Hagel said…
Ken - Linda and I enjoyed our time with you and found the visit both informative and interesting. I came away with some good ideas and will probably hit you up with some questions later on when I go to put some of the changes in place on my plane.
We discussed the venting of the tanks, and I looked that up on my drawings. It is discussed in a note on the upper right corner of 7-V-11. My drawing is dated 11/2004.
Thanks - Terry
At 10:51pm on April 29, 2010, Terry Hagel said…
Thanks for the info, I will call when I get in the area.

Terry
At 10:11pm on April 29, 2010, Terry Hagel said…
Do you have a phone there, so I can call if I can't find you? Anything special required to get to the hangers?

Terry
At 10:09pm on April 29, 2010, Terry Hagel said…
How about between 1 and 2 PM
At 2:57pm on April 29, 2010, Terry Hagel said…
I am going up to Salem until early next week. My cell phone [which is monitored most of the time] is 503.510.6372. I do want to take a look at your plane and talk about flying with you. I wish I could get over there while you were doing your annual and take a look at that project. If we get in contact in time for me to swing by this friday[4-30] (assuming you are still working on it), I would drive up through Medford rather than my normal trail which is up hwy 97. If not, later ....
Terry
At 11:21pm on April 9, 2010, Terry Hagel said…
I have heard that some owners have removed there slats for VGs. When did you get your plane completed? What do you now have as an empty weight? We are not to far apart - if possible, I would like to take a look at your plane. If you are out and about, I could meet you at the Chiloquin airport. I also drive over to your area every so often and could stop by.
Terry
At 12:15pm on April 6, 2010, Terry Hagel said…
What engine do you have in your plane and how many hours has it flown? I've just got my wings on and am working on the slats. Hopefully, I can get mine in the air sometime this year.

Terry
At 7:02pm on March 6, 2010, Cedric Schieber said…
Hi Ken,
I have been finishing the bird down in Cloverdale, CA at a zenith builder assist location - Quality Sports Plane. Been down there for 4 months, almost every week. Finished it last week and will do taxi tests and get it inspected soon, will do the 40 hours down in CA. maybe due 25 hours down there and then get a ferry permit to get it to IV Valley airport. Just got my Bi Annual done with a friend up in seattle, Yea.
Cedric
At 8:58pm on January 27, 2010, Cedric Schieber said…
Hi Ken,
I have finally made it and will be flying soon, Maybe taxi test next week after finishing the engine wiring and instrument panel. How are you doing? been flying much, how is the 701 doing?
Miss you and your bird.............

Cedric

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service