Brad d'Entremont's Comments

Comment Wall (13 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 4:43am on March 3, 2017, Rich M Ward said…

Brad, just checking in. About 6 months ago, I finally began building a 750 STOL kit. It's been a bit of a slow start, but I'm having fun. Not as much fun as flying around the Yarmouth Basin, though. Love the pictures. Hope all is well. 

At 7:05am on March 18, 2012, Rusty King said…
Have a safe trip, check out the Viking engines, that is what I am installing and will be receiving it in June.
At 2:21am on March 17, 2012, Rusty King said…
Thanks for the invitation, I will examine my vacation opportunities for later this year but before it gets cold. I should know how my work assignments will go after I finish my Montana job in early to mid may... Happy flying.
At 2:40pm on March 15, 2012, Rusty King said…
Brad, sorry for the late response, I'm now in far northwest Washington state near The Canadian border for a work project. My Acadian family name was Aucoin and there are a lot of Cajun families with English last names through marriage, some however were simply anglicized as in your example "king-roi." The king family has been in south Louisiana since the 1800's. yes I love some lobster but don't get to eat enough of it. I have been to Quebec before but have always wanted to see Nova Scotia and that whole area, perhaps my wife and I could make that happen, plan a trip up. I would love to see that plane and meet you in person. I particularly like that cabin of yours.
At 10:44am on March 7, 2012, Rusty King said…
I won't be able to attend due to work. I work shutdowns in refineries around the country in the spring and fall, but I also have alot of time off. I have the tail section and 95% of the fuse done. I'm hoping to finish wings by December. I've never been to any of the big shows like Oshkosh or sun n fun, I plan to change that. I would like to meet you and see your plane one of these days. I bet everyone will have one eye on the clouds this year at the event, that was terrible. I'll keep in touch.
At 11:02am on March 6, 2012, Rusty King said…

Thanks for the reply Brad. I live just across lake Pontchartrain from New Orleans (northshore), my ancestors were part of the expulsion from your area, Acadia, but went to France for a few years, then settled around Lafayette, La (St. Martinville) . On building, I cant believe how fun it is to build this plane, my first attempt was a Biplane in the early nineties, not so much fun, very labor intensive, I did not finish it due to life getting in the way. Your photography is spectacular. I like the views of the float planes sitting on the smooth water. I am putting the viking engine in my plane and depending on  finances, could possibly finish by the end of the year. Maybe I'll eventually put on floats?? As you know, we have plenty of water around here.

At 3:08pm on January 31, 2012, Andre Levesque said…

Hi Brad,

I'm still in the building process of my CH750. The picture that you see on my profile is a Photoshop mock-up that I made to give me an idea of what a 750 on floats  would look like with a Radial engine.It's a  Rotec radial 7 cylinder 110hp with LOTS of torque -:)  3 blades/68" diameter.  The engine with all acessories is 220lbs, similar to the Continental O-200.  I will have to install it closer to the firewall an dthe empty weight should be close to what the O-200's are. I could also use their 9 cylinders 150HP and 270lbs install weight but that is not necessary really. 

I am scratch building my 750 and I'm on the wings right now. Slow process as work keeps getting in the way...lol

The interesting part will be to design and fabricate the round cowling. Nothing an english wheel  couldn't do. I need to practice and learn new techniques.

I've been to the sherbrooke fly-in as well this year. Pointe-Claire is a suburb  west of Montreal and 1.5 hrs from Sherbrooke.

I love all of your pictures...I can't wait to take some of my own plane on lakes and rivers...LOL

Have fun ...and safe flying !!

At 10:27pm on January 23, 2012, Rich M Ward said…
Thanks. Any guidance you have for negotiating all the sites and information would be welcome. I'm feeling both eager and anxious. It's a little like driving in Times Square at night. There are 10,000 lights blinking all at once. 50 of them are important, and 10 are critical. The rest are attractive, but.... I guess I'll wander around a bit, keeping my eyes open. I have two years to go to retirement, so I have time to enjoy the planning and set-up phase first. Please keep me posted.
At 12:27pm on January 12, 2012, Conrad Watters said…

Brad thanks for posting the excellent photos. My 750 is just finished.

One of my plans is to visit my sister who lives in Halifax and cottages an hour south. I will try to do an adventure flight around Nova Scotia. Your photos are a good selling point for the trip.

Conrafd

At 10:45am on September 6, 2010, Bob McDonald said…
The use of vinyl graphics on your CH701 inspired me to use vinyle on my CH750.
At 9:00pm on July 28, 2009, Robert McNaught said…
I would like to use a 100 hp but I already have a mount that will fit only the 80 I think.
At 8:53pm on July 27, 2009, Robert McNaught said…
Hi Brad
My garage is getting real small fast. I should be start to fit all the pieces together by the fall. I am still looking for an engine though. No of any used ones?
Take care
Rob M
At 10:24am on July 24, 2009, Harvey Richards said…
Welcome Brad. Nice to see you here.

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service