Dan Wilde's Comments

Comment Wall (19 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 6:15am on June 18, 2021, Michael Mccarthy said…: Hello,

My name is Mr. Michael Mccarthy, I have contacted you before without any response from you. Please replied if you receive this message. I have something very important to discuss with you, I have a vital information to give you. Could you please get back to me on (mmichaelmccarthy4@gmail.com ) for full details.

Michael Mccarthy.

At 6:14pm on September 23, 2009, Mark Sherman said…: Dan.

Will you be going to Cloverdale on October 10th? I was just over there on Friday and Doug and Lori wanted me to ask anyone I know to come on over.

Mark S.

At 8:57am on August 3, 2009, Bill W. Proctor said…: Dan, thanks for the info; I did the job over the weekend and things came out just fine. a lot fo fileing for the 12 end caps. Bill

At 5:17pm on July 28, 2009, Bill W. Proctor said…: Dan, i haven't been able to make any sense out of how to integrate the jury strut caps; jury struts and brackets together. Drawing 7-V-10 shows the caps inside the tubes but the tubes look they have been compressed at the ends?? What di you do? Bill 209-772-1183

At 12:38am on July 20, 2009, Bill W. Proctor said…: Dan, have you heard about the UL2600? www.ulpower.com
what do you think? Come on up and try another landing...Bill

At 10:02am on May 12, 2009, Dan Wilde said…: I hope not. What was it about?

Dan W.

At 7:24am on May 12, 2009, Mark Sherman said…: Dan.

Was that you on TV last night? I just cought a peek as I walked by the TV.

Mark S.

At 9:38am on May 8, 2009, Bill W. Proctor said…: Dan, will probably see you at Cloverdale this weekend. Have a good flight. Bill

At 3:29pm on May 7, 2009, Dan Wilde said…: Rick: I would appreciate the call.

Dan

At 10:27am on May 7, 2009, Rick Lach said…: Hi Dan,

I should be there and I'll give you a call and let you know what's real.

Rick

At 9:26am on May 7, 2009, Rick Lach said…: Hi Dan,

Things here are looking perty good for this weekend. I will be going up on Friday and will meet Lee at Oakdale and then on to Cloverdale. They are forcasting Fog in the Morning for Cloverdale and clearing around 11:00AM. Are you still planing on coming up Saturday morning?

Rick

At 6:23pm on March 24, 2009, Rick Lach said…: Hi Dan,

Sounds great. What is your LON & LAT so I can find your place.

Rick

At 11:06am on March 24, 2009, Rick Lach said…: Hi Dan,

I was planning to go to the Fly-In at Quality Sport Planes in Cloverdale on May 9th. I was going to fly my 701 and was curious if you were going. If so I could come by on my way up and we could go in to Cloverdale together. Let me know if you’re interested.

Rick

At 5:49pm on March 14, 2009, Bill W. Proctor said…: Dan, I hope you enjoyed the visit to my airport as much as I did. It was great to get some pictures of activity on my field...plan on stopping by again. I posted the pictures on my page; check them out. Bill Proctor

At 7:55pm on March 10, 2009, Bill W. Proctor said…: Dan, I will be here on Saturday. The strip is plenty long but is narrow with oak trees on the South side. I have one neighbor that is not aviation friendly!!??
I can get coordinates for you. If you like I could meet you at Lodi or San Andreas airport and we could drive over here and look at the strip and the location of the not so friendly neighbor. Google satellite maps has a good pictire of the strip. 5251 Oak Hollow Road, Va lley Springs, CA 95252 give me a call, Bill
2097721183

At 11:03pm on March 8, 2009, Bill W. Proctor said…: Dan; I have a 1000 ft strip on my property near Valley Springs just EAST of Lodi.
Feel free to stop bye sometime. Bill Proctor 209-772-1183 home
925-699-3253 cell

At 11:09am on January 20, 2009, Terry Gallian said…: Dan, I would like to make contact with you if possible. I just started a 701 from a "project" I purchased. I would like to see a finished airplane. I live in Tulare, CA. twgallian@att.net

At 8:32pm on January 8, 2009, Rick Lach said…: Hi Don,

Sounds like some future fun. I am currently snowed in as I life up in the Piute mountains above Lake Isabella. The 701 I fly has the Rotax 912ULS 100HP engine. Which engine is in your aircraft? Are you based out if Turlock or some other airport?

Rick

At 10:56am on January 6, 2009, Rick Lach said…: Hi Don,

My name is Rick and i saw your name on the new Zenith Builder page a and noted your in my area. I live up in Kernville and I'm looking for friends to go flying with. I have a 701 and get board from time to time when flying by myself. If your interested let me know. rick@ravenaviation.us

Rick

No comments yet!

Welcome to
Zenith Aircraft Builders and Flyers

Sign Up
or Sign In

Or sign in with:

New from Zenith:

Zenith Planes For Sale

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

West Coast USA:

Pro Builder Assistance:

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Badges | Report an Issue | Terms of Service

Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).