Bruce Cobo's Comments

Comment Wall (13 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 5:19pm on January 24, 2015, Jerry Griego said…

Bruce,call me at 576-418-0685

Jerry Griego

Socorro, NM

At 6:14pm on January 22, 2015, Bruce Cobo said…

Hi Jerry, I haven't sold it yet. I have the William Wynn mount, valve covers, manuals and oil separator. I will make someone a nice package deal.

At 2:37pm on January 22, 2015, Jerry Griego said…

Hi Bruce. I think you will like the Viking very much I got to fly in one at copper state. I also did some instruction in a 750.I went to Carson city Nevada.Bill drake was my instructor.very good instructor. I bought my 701 Wings from a doctor that has a hangar and plane at Peoria airport. I think his name is Dr. Waltrip. Do you know him? Did you sell the Corvair motor? I did not see a price.

Jerry Griego

At 11:29pm on December 15, 2014, Stephen R. Smith said…

Hello Bruce,

CAMit is the manufacturing company that has always made Jabiru engines to Jabiru's spec. They have come out with their own version, similar but better.

I had two Jabiru engines that both failed with camshaft-related issues.  That is why I have switched to CAMit.

CAMit's web site is: http://camitaeroengines.net/

steve

At 10:43am on November 27, 2012, Lawrence Van Egmond said…

Hi. Bruce. I went with the header tank so I could use all the fuel in the wing tanks and still have a reserve for emergencies. Also I had heard that it was possible to get a fuel starvation situation with low fuel on a steep decent. 

At 12:59am on November 13, 2012, Deon Lombard said…

Hi Bruce

Deon Here from South Africa. Thanx for the support. Every time i open my plans i just cant wait to start snipping and bending. However, unfortunately, preparations have to be made and finances gathered for materials. But, never the less, any advise, tips and spare parts (ha ha) are welcome.

Kind Regards

Deon lombard

At 12:56am on November 13, 2012, Deon Lombard said…

Hi Bruce

Deon Here from South Africa. Thanx for the support. Every time i open my plans i just cant wait to start snipping and bending. However, unfortunately, preparations have to be made and finances gathered for materials. But, never the less, any advise, tips and spare parts (ha ha) are welcome.

Kind Regards

Deon lombard

At 9:02pm on October 19, 2012, RANDY L HALLOCK said…

Hi Bruce, I see you are a scratch builder. You have no idea how much respect and admiration I have for you guys to tackling such a project. Hope your having fun, good luck.

At 4:52pm on March 1, 2012, Ben Schaefer said…

The Viking engine makes the most sense and gives you the best bang for the buck.  Compare the numbers to a 912...then look at the price.  You get everything you need FWF for less than $17K.  He has a very sharp cowling/polished spinner/3 blade ground adjustable prop/engine mount/wiring harness/dual fuel pumps/FADEC/oil cooler etc.  He has a video on engine installation.  You are able to order the engine /components online as well as put money down and make regular payments.  An Engine ordered March 1st will be ready the end of August.  This will allow you time to run lines/fancy panel etc.

I talked with the presidents of UL, Corvair....they both spoke very highly of Jan Eggenfellar and were very impressed with his technical expertise.  I only wish that he had a salesman to talk to.  He's so busy and trying to manage a rapidly growing business that he sometimes leaves us customers hanging.

At 7:31am on February 9, 2012, Joseph Begany said…

Bruce

Since you have started your fusalaage I thought I would ask how much time you spent drawing the paterns out for the odd shapped side panels?  Did you find it difficult to keep the cut edges identical so the sides matched up?  Most of the build is basiclly straight lines and the side panels are critical to getting the cage to fit properly and square up for proper wing lines.  Are you building the fusalage first so that you can adjust the wing connection points as you build the wings?  It appears that you haven't done the wings yet and that is somehting that I have been considering.  I don't know which is easier to adjust should the need arrise.  Will you build your cage or purchase?  I like the idea of using the pipe to bend some of htose parts.  from you photos it looks like it worked well.  Thank you for your time.

Joe B

At 8:56am on February 8, 2012, Joseph Begany said…

Bruce

You have done some very nice work.  I'd like to hear about the pipe you used to make a couple of the long bends.  Did the radius of the pipe work out well for you?  The parts look ver nice in the photos.  Would you say that the pipe was a good option worth the time or would you suggest looking for a long break?  You have posted soem nice photos.  Keep up the good work.  .

Joe b

At 6:42pm on December 26, 2009, Ken Talarico said…
I'm off of work until Jan 11 so I'll be in the garage till then! I live in Chandler, just north of Sun Lakes. I know...other end of the valley. Anyway, give me a call anytime. 480-540-1781 You are also welcome to come over and take a look at what I've done so far. I can talk airplanes all day long.

Ken
At 9:57am on December 26, 2009, Ken Talarico said…
Hi Bruce,

I see you're in Payson. A scratch builder too! I got my plans in early Oct. Rudder complete, all ribs, lots of misc parts (whatever aluminum I could get my hands on...) Working on the spar assy now. How about you?

Ken

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service