Kurt Satter's Comments

Comment Wall (13 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 6:45pm on September 1, 2017, Doug Malloy said…

Come visit anytime Kurt.

At 12:00pm on July 30, 2017, Kenneth Stapleton said…

Hi Kurt

Thank you for accepting my friend request. It appears that you are well into your 701 build. As you can see, I am just beginning. I have the rudder and horizontal stabilizer built and am now working on the elevator.This airplane is WAY easier than anything I have attempted to build in the past!

As to living in a hangar, there are pros and cons. Having the project a few steps away is great, but there are only 4 of us on the airstrip that fly and there is very little interaction. We built our hangar for about what one would pay for a good backyard shop. You mention that you are looking for a few acres to build on...there are 2 hangars for sale here and still quite a bit of property available. There is not a lot of activity here so property is quite inexpensive. I'm not trying to sell anything...just thought I would mention it.

My wife and I are retired and are usually around so feel free to come up for a visit at anytime. Our airstrip is 3000x75 and is turf. We are about 7 miles northeast of Nocona and the airsstrip is marked as "U"...unverified. 

Ken

At 9:46pm on July 26, 2016, Chris Boultinghouse said…

Hey Kurt, thanks for the wall comment and the contact info for Frank! 

At 7:56am on June 16, 2016, Charles Plumery said…
Thanks for the file on the no-slot-flap, I like its elegance and if I can get the wings off the bench and on the fuse I will be attempting it. Thanks again Kurt.
At 11:27am on May 14, 2016, Norm Neuls said…

Kurt, I got your friends request also from Viking and clicked on it but don't know if it went thru.  I don't do Facebook!  I just checked my wiring V/View to ECU and also the wiring schematic that came with my Viking View.  The white/green wire from the View connects to the white/red wire from the ECU(fuel flow).  The wires from the View and ECU were all labeled by Viking as received.  I ran the engine for the first time last summer and as I recall I was showing fuel flow on the View.  My 110 is a late 2014 delivery and I like to communicate with other 110 owners re: tips, hints and operation impressions.  Instead of cluttering up the forums,I prefer to use e-mail.  Mine is normneuls@yahoo.com 

At 10:35am on October 23, 2015, Terry D Hobert said…

Hey Kurt, so your second airplane also?  The 701 has been an enjoyable build, I have another 1 yr 11 months until I retire...Hopefully... Most likely will still be on my 701 project.  Looking forward to this being my main occupation along with a couple other interests.  Flying up to Port Angles in J3 Cub with John Edwards to look over David Orr's fresh flying 701!!! Best and good to have another co-builder to chat with!

Terry

At 10:34am on August 10, 2015, Lyndon Leining said…

Hi Kurt,

I do have a viking engine installed in my 750 Cruzer. Not done yet. Working on panel.

Will next tackle, cowl, windshield, doors, then  build and attach wings, install baggage metal and windows in that order.

Lyndon

At 5:42pm on February 8, 2015, Cliff Stripling said…

Kurt... Have fun building your 701.  I have found it very rewarding.  The construction of these kits has evolved so much over the years that I probably wouldn't be able to offer you much advice.  Everything is pretty straight forward.  I purchased my kit from a guy in Canada who had partly built it, then his wife developed a very debilitating illness that left her paralyzed and he had to put it in storage.  I trailered it down from Vancouver Island a couple years ago to continue his work.  I am now waiting on the FAA to inspect.  There are two 701's in this area and another couple down around Fredericksburg. I stopped flying about 8 years ago. A friend is planning to fly this one for me.  Soon afterward I will be selling it.  I love building airplanes and hope this will not be my last.  This is my 5th - Quickie Q-1, Kolb MK III, Piper Cub L-4, Vans RV7A and now Zenith CH701

At 2:19pm on January 2, 2015, Jan Eggenfellner said…
Hi Kurt. You have plenty of smarts to tackle the wires.
Don't forget the principle of wiring.

One wire at a time
See
http://youtu.be/gXnGfrqnDD8

For a 17 video series

Jan Eggenfellner
At 3:06am on December 31, 2014, Jan Eggenfellner said…
Hi Kurt
Wile giving your friend in Thailand information about where he could buy the steel bungee from Viking I noticed your comment about the Viking inch and maybe being complicated to install in your aircraft. I hope you have seen our latest straightforward installation video on the top of this page? It is the second video down from the top it really shows you step-by-step how easy it can be.
http://vikingaircraftengines.ning.com

Let me know if you find it less complex.

Jan
At 5:51pm on December 1, 2014, Chumphol Sirinavin said…
Look into my build pictures for my custom trailer.
On the engine, a friend in New Zealand is happily flying with Jabiru 3300. 2200 is a little under power he said. IMHO, you won't regret studying info for Honda Viking engine.
On building 701, you should consider all these mods:
1. Nose strut steel bungee, as discussed.
2. Adding head room by curving up the flat roof. Search for the blog I've posted.
3. Look up Joseph Truncale's build pictures for separate elevator control from the torque, so that your 701 can fly straight and not making slight left turn.
4. Build the wing leading edge with "full nose rib", or simply leave the slats off.
5. Change the horizontal stabilizer from the hallmark inverted airfoil to a simple bullet shape.
6. Put fairings on the wing struts.
7. If you are not so much of a bush pilot, you might want to build your 701 the long wing version.

You may discuss more of these with me later. You can just build and fly your 701 as per plan and later on add strut fairing, leave the slats off and save 16 pounds, change the HS shape or add micro VG's to the elevator, Beanie Mod the roof, etc.
At 11:39pm on November 29, 2014, Vance Simons said…

Hey Kurt, I got you message on my site about the slotless aileron controls. I have some pictures and information in my computer that I will try and dig up for you. I still plan on doing this modification but am still constructing wings. I'll look for it tomorrow and forward you what I have.

Thanks Vance

P.S. My Phone Number is (509) 599-9477 and my email address is vancesimons@gmail.com You can text me at the above number also.

At 6:14am on November 10, 2014, David Back said…

Hi Kurt. We remember you too. Wish we could have had more time to talk about everything. It's great that you'll have your kit soon and be able to spend the winter working on it. I'd be surprised if you weren't flying it by spring 2016. We got our plans too and have been studying them and watching the videos. It'll be a great, fun, complex, rewarding experience and I feel like I'm already on it. I have the rudder hung up in the shop providing inspiration already. You'll have to keep us informed about your project as it goes along. It'll be fun.

David Back

New from Zenith:

Zenith Aircraft For Sale 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

 

Zenith transition and Sport Pilot training:

Quality Sport Planes
Cloverdale, California:

Wheels & Wings

Pro Builder Assistance

© 2019   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service