Wayne Woloshin's Comments

Comment Wall (51 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 9:23pm on December 13, 2019, Todd Luebstorf said…
Thanks Wayne, yes it would be great to meet someday. Your daughter lives pretty close to me.
At 5:15pm on November 22, 2019, Robert Shoukry said…

I don't think the Sebring show will be held anymore

At 5:09pm on November 22, 2019, Robert Shoukry said…

I posted an ad here and cannot for the life of me find out how to delete it and post a new one. I have a 912uls complete engine for sale and was hoping to list it here

At 5:07pm on November 22, 2019, Robert Shoukry said…

So you're going to be here around January 2020 right

At 5:00pm on November 22, 2019, Robert Shoukry said…

Hello Wayne

Sorry it took me a little while to get back to you. Absolutely. Drop me a line when you are in Florida. I am presently working ot two kitfoxes a 3 and a 5. I have been in search for a zenith 750 but the prices have gone up and I figure I will wait and find a project that someone has not finished ... 

Reach out to me when you get in

Thank You

Robert

At 3:11pm on November 22, 2019, Hugh Urquhart said…

Thanks Wayne, I will.

At 5:28pm on November 7, 2019, Robert Shoukry said…

Sure thing Wayne, looking forward to it

At 3:09pm on October 19, 2019, Auroramech (DanB) said…
Wayne it's the Auroramech
I tried to answer to your comment on my wall but I'm new to the forum and am not sure if it worked. Did you receive it?
Thanks
Dan
At 7:27pm on October 7, 2019, Jonathon Peacock said…

Thanks Wayne, beauty hangar!

At 4:58pm on September 15, 2019, Stephen Wicklander said…

Thanks Wayne,

I hope so also.

Steve Wicklander

At 7:45am on July 25, 2019, Tony Harnett said…

Hi Wayne,

Enjoyed the Midland Fly-In very much ... it was good meeting you as well. Don't know if Edenvale is in the cards at this time but hope to see you there.

Cheers, Tony

At 8:50am on June 16, 2019, Thomas Knight said…

Thanks Wayne,

We met at the Thursday lunch 4-5 weeks ago.. I was the guy asking all the questions about your 701. I’d love to come have a look at yours sometime.

cheers

tom

At 5:35pm on May 12, 2019, Ron Crook said…

Hello Wayne did you get a  chance to test fly the plane for the new season? Flew Teds 701 from owensound to edenvale yesterday..nice flying airplane. Flew mine last weekend and finally the radio seems to be working properly. we have to get together at some point Im ready for my climb test and file to get away from the airport tired of flying circles around for 25 miles...maybe you can fly up to owensound just call me first to see if Im up? Ron and Val

At 2:50pm on December 23, 2018, David J. Beaulieu said…

Wayne,  who knows why a cylinder develops a crack?  Unless you send it away for analysis to see if it was a material or manufacturing defect I would be guessing.  If I am going to guess I would say it may be "under" designed.  ULPower has increased the thickness of the flange and cylinder base since my early version of the engine.  As it stands now, I have replaced only that one cylinder with the newer version and will keep any eye on the others.

Congratulation on your new hangar...I'm envious!! Cheers and Merry Christmas...Dave

At 4:37pm on December 22, 2018, Don Kingsley said…

they are Rebel floats, 1800 displacement. A good , strong float.

At 3:21pm on December 22, 2018, Don Kingsley said…

Ted’s 701 is in Fred’s hanger at CYOS, he brought it there for me to take the floats off. I live near there and was not going to drive to lake Simco to work on his plane. 

I am in the midths of building a set of anphib floats that go on a Murphy Rebel that belongs to my neighbour at CYOS . That is a lot of work and would not do it again.  The Rebel is a nice plane.

i have no info on the other Zenith ptoducts. 

At 2:08pm on December 22, 2018, Don Kingsley said…

Ted has a cirrus, 172 on floats, and the 701. He lives on Lake Simco. Ron and Ted are blood brothers

At 10:57am on December 22, 2018, Don Kingsley said…

Ted Cohen is in Fred’s hanger with Ron, i took the floats off Ted’s plane and put on jeep gear. He has it up for sale. I my hanger ,i took the floats off of Dave’s plane and put on jeep gear. My Vans is in there also that should be sold this week. I am looking for something else. Started fixing up a KIt fox but it will be a while before that is done.

Don

At 10:21pm on December 21, 2018, Don Kingsley said…

Yes, it would be nice to meet, i have a hanger second row ,second in from the road. C8

Good looking plane you have. Don

At 7:23am on December 20, 2018, James Ballenger said…

I hope to get to know the zenith crew as time goes on and as I get the build going.  I do plan on going to sun-n-fun as I should have a few questions zenith by then.

Jim

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

Pro Builder Assistance
 

Pro Builder Assistance

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2020   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service