Jim Cates's Comments

Comment Wall (6 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 3:35pm on February 14, 2018, Cliff Stripling said…

Jim....  I used a 582 done by Rotax Rick, not the 670.  Cliff

At 11:21am on February 1, 2018, Scott Smith said…

Hi Jim,

  I decided to go for the 130. Paid $20k for the entire FWF from firewall to spinner.  The entire FWF weight including propeller, spinner, mount, engine, fluids etc is about 250 lbs which keeps me within the 265 max 601 HD design limitations. I just decided I wanted the very latest technology out there and an engine that is still in production.

I was quoted $12 k for the 110 with Fwf package, however, Apparently that engine is in high demand, so supply and demand may dictate a price change, I dont know.

At 11:41am on January 21, 2018, Loren Warner said…

I understand.  As for the O-200's, the weight was also a concern of ours.  Rotax being the lightest is a serious contender but the price is too high for us.  We also looked seriously at Corvair and UL.   The reasons we selected the Viking 130 was that although it weighs about the same as an O-200 or Corvair, it puts out an additional 30hp, and with a drive gear like a Rotax it has more torque.  UL was considered, but being from Belgium, the lack of available parts and service was a major consideration.  That brought us back to Viking with lower price, more power to weight, and parts and technical support readily available.  You should contact Bob Jones, he's a Zenith member and has built two or three 701's and only flies them on skis and floats.  He probably knows more about 701's than anyone.

At 6:42pm on June 24, 2017, Scott Smith said…
The homebuilthelp website is http://homebuilthelp.com and the "metalworking 101 with rudder workshop" is the correct video. $29 but well worth it!
At 6:38pm on June 24, 2017, Scott Smith said…
Hi Jim,
I saw your question about drill sizes in the main room. I tried to reply there but you had logged off. I am using #40 drill bit first, then I will use #30 to redrill to final size. The Homebuilthelp video on the rudder assembly is fantastic. He gives all the tricks.
At 9:08am on September 4, 2012, Les Bolen said…

Hi Jim, I am a first time builder, and i have close to 900 hrs on my 650 build. It is close to ready for maiden flight. It depends what avionics and options you put in as well. I have the dydnon skyview system, wheel pants, wing lockers, I carpeted the interior. Paint job alone took over 120 hrs.

New from Zenith:

Zenith Planes For Sale 

Classified listing for buying or selling your Zenith building or flying related stuff...


Weather Maps

Custom Instrument Panels
for your Zenith

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.

Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits

Zenith Apparel from EAA:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.


West Coast USA:

Transition Training:

Pro Builder Assistance

Pro Builder Assistance

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2019   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service