Larry Nelson's Comments

Comment Wall (11 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 9:25am on December 8, 2017, Joe Hopwood said…

Hi Larry,  I know very little about the HDS so not sure what to say as I have an XL TD.  I will answer any questions you may have to my best ability and knowledge.

At 12:40am on November 4, 2017, Michael T. said…

hi Larry nice to meet you

I`m just getting started on my 640 buld and I`m very excited about it. You need to talk to Scott Stewart about his spreadsheet on the 640. This guy is wealth of information on the 640.

He created a 640 errata sheet thats a must have and a cost materials list for the aircraft also. he replied to me on my plane page you can find his link there

have great day

At 5:12pm on January 3, 2016, Jerry Latimer said…

Larry

Here is a copy of the invoice from my last strut order from McMaster-Carr.  If you struts are correct the placement of the rear attachment point has to be too close.

Jerry Latimer

Confirmation%20for%20Your%20November%2029th%20Order%20with%20McMaster-Carr.PDF

At 6:09pm on October 25, 2015, Jerry Latimer said…

Larry,

I'm sending you 3 photos of canopy prior to install while it was on the plane.  It looks very similar to yours.  Some of the gap on the side is needed for clearance for the canopy frame.

At 4:13pm on September 23, 2015, Rich Whittington said…
I got my tail wheel endorsement in a Citabria. The HDS is a docile tail dragger.
At 3:19pm on September 2, 2015, Chad Drzewiecki said…

Hey Larry how's it goin!? I wish I was going to CC this month, I am going to the one in November down in Barnwell! Your project looks awesome! You're a bit ahead of me, so I'm sure I'll be askin' you plenty of questions!

Cheers,

Chad

At 3:52pm on January 29, 2015, Larry Nelson said…

Getting closer every day.  Just got a 140 crank that was at standard.  So i had it magnafluxed and all is well.  So now I am able to get it polished, treaded and begin to close the lower engine.  Also began working on the wiring and canopy.  with any luck i may be able to finish by Christmas (just not saying what chrismas)

At 9:29pm on December 7, 2014, John Maselli said…

Larry I am working on the second wing i keep adding pics so you can see my progress. I try to do a couple of hours a night during the week. More on the weekends. I finished the bottom skin and wing tip. Now today I cut the top skin and added the stringers,

At 1:30pm on November 18, 2014, John Maselli said…

It's great to have someone to converse with on this project I think that's half the fun of building is sharing ideas etc. I am sure I will have many questions. I bought the kit from some old aviators who could not go any further on it. It's great to get back into building a plane like this.  I have some pics of the arrival of the kit and setting up the garage on box I will send you an invite I need your email.

At 9:15pm on September 17, 2014, Frederick Schutt said…

Just wondering how far you are on completing your corvair engine. Seems like you know all the secrets on contacting WW and Mark. Maybe you could let me in on the secrets.

Fred

At 10:27pm on April 24, 2013, Adam Hess said…

Welcome. I'm just starting out too- received my plans yesterday. I'm plans-building a 750. I am in a position where I can only draw the templates on paper now (see my profile if you want), but later I'll glue the paper templates to my wood to cut my form blocks. 

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

 

Wheels & Wings

Pro Builder Assistance


 

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2019   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service