Doug Dugger's Comments

Comment Wall (12 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 12:03pm on September 26, 2013, Rusty King said…
Doug, I wanted to ask what the results were and overall impact of the client you had with the top fighter tires? I bought them and just about to put them on, although I was thinking about waiting till after first flights... Did you get feedback on that?
Thanks
Rusty King
At 6:37am on April 11, 2013, Normand Lambert said…

Hi Doug,

Thanks for the tip for the rims...I'll lookup this Honda engine paste...Maybe same as engine block gasket paste ... Looks like the leaking problem is widespead ..You'd think Matco would do something about that . Provide some type of sealant with the tubeless kit or recommend something to use...

Regards,

Norm

At 5:14am on September 27, 2010, Mike Lord said…
Thanks Doug,
I'll call this AM
Mike
At 1:09pm on October 19, 2009, Dan Robinson said…

At 6:00pm on September 21, 2009, Dan Robinson said…
Hey Doug,
You have shipped completed kits, I want to stack plywood boxes then put the fuselage on top. How would you do it and what are the measurements.
At 9:35pm on September 17, 2009, Dan Robinson said…
Hi Doug,
Dennis the AP that has been corecting the plane told me tonight on the phone that he has now fixed all the things in the pic (Rudder, Elevator, Hort. Stab) The rest that needs correcting is FWF cowling etc. So If I get the J2200 FWF that includes the cowl, and prop? so it will be a done kit.
At 9:16pm on September 17, 2009, Dan Robinson said…
Doug ,Dan here I now have the pics on my page Dan Robinson
At 6:08pm on September 17, 2009, Dan Robinson said…
Doug I have decided to go with the J2200 fwf I'm just trying to figure out how to get it to QSP. I have sent all pics to Michael and all emails between the sellers AP also. Michael was supposed to forward them to you. The flap was disconnected in the pic from the left of the left side fuse and wing tip Thanks for your input Everyone from the sellers A&P to zenith and QSP have great. Dan.
At 11:33pm on July 23, 2009, Robert Reinero said…
Doug
I hope you still have the elevator trim tab parts I was unable to purchase when I picked up the wing leading edge skin and horizontal stab kit. Can I still purchas at the same deal we struck on the other parts?
At 3:38pm on April 16, 2009, Bob Reinero said…
Doug
I need an un-drilled skin. What is the cost for the skin and shipping.
can I down load a parts price list? Is Zenith going to design a push rod solution for the flutter problem.
At 8:24pm on March 3, 2009, Chris Dickson said…
Doug you are correct . The other two photos didn't post. I'm training in the
Ercoupe and asked the question ,is it anyhting like flying a 601?


Chris
At 11:15pm on February 16, 2009, Terry Gallian said…
Thank you very much Doug. I may take you up on your invite some day.
Regards,
Terry

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service